F-1300 Mud Pump
Features
F 1300 mud pumpfor oil drilling have features of solid and compact structure, small volume, good and reliable performance. It can meet the drilling requirements such as high pressure and big displacements whether in land drilling or off-shore drilling.
F 1300 mud pumps have a longer stroke and can be operated at a lower stroke, thus improved the water supplying performance effectively and extended the lifetime of mud pump fluid end parts greatly.
Forced lubrication combined with splash lubrication to make lubrication effect perfect;
F Series Mud Pumps are manufactured under standard of API Spec 7k, mud pump parts at the fluid end are interchangeable with the parts that are in conformity with API Spec.
The suction pulsation dampener has an advanced structure which is reliable to use and can make the pump realize its best suction performance.
Performance of mud pump was greatly improved by durable fluid end; and examination, mud pump repair and mud pump maintenance are easier to make due to its independent structure.
F-1300 mud pump specification
|
Model |
F-1300 |
|
Rated Power (kW/HP) |
969/1300 |
|
Type |
Triplex Single-Acting |
|
Strokes per minute |
120 |
|
Stroke Length(mm/in) |
305/12" |
|
180/7" |
|
|
Gear Type |
Herringbone Gear |
|
Valve Pot |
API-7# |
|
Gear Ratio |
|
|
Dia of Suction Inlet(mm/in) |
305/12" |
|
Dia of Discharge Outlet |
5 1/8"flange |
|
5000psi |
|
|
Max Pressure(Mpa/psi) |
|
|
Overall Dimensions(mm/in) |
4617*3260*2600 / 82"*128"*102" |
|
Weight kg(lb) |
If you want to buy an oilfield equipment, please contact us.
More types of discharge manifold equipment, please visit our website.
在线联系供应商
Other supplier products
 |
Fig 200 Hammer Union | Fig 200 Hammer Union Working Pressure: 2,000 psi(138 bar) Features: Economical,general-purpose union 1-to 4-inch sizes Butt-weld available Recom... |
 |
F-1300 Mud Pump | Features F 1300 mud pumpfor oil drilling have features of solid and compact structure, small volume, good and reliable performance. It can meet ... |
 |
Hammer Union | Looking for hammer union manufacturers? Hammer lug unionwe manufactured is used to connect kinds of manifold and lines. Hammer union 602we manuf... |
 |
Junk Subs | During drilling process. LB type junk subis applied mainly for fishing of shivers and fallen objects such as carbide tooth. drill bit and bearing w... |
 |
Brief Introduction and Characteristics of Reciprocating Pump | Brief Introduction and Characteristics of Reciprocating Pump Single and double acting reciprocating pumprelies on the reciprocating operation of p... |
Same products
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
新款 YHCB 系列可移动卧式圆弧齿轮输油泵 | 卖方: 河北盛辉泵业 | YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要... |
 |
便携式WCB系列不锈钢高粘度柴油齿轮输送泵 | 卖方: 河北盛辉泵业 | WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，... |
 |
库存 ZYB 系列不锈钢废重油输送高压齿轮泵 | 卖方: 河北盛辉泵业 | ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用... |
