TILTING CHECK VALVE
TILTING CHECK VALVE
Valve Size:DN200-DN1200Pressure Rating: PN10/16/25.Design & Manufacture: BS EN 12334Face to Face Dimension: BSEN558-2 Series 14; ISO5752-2 Series 14Ends Dimension: ISO7005-2 PN10/16/25; JIS 10K; BS10 TABLE D/E; ANSI B16.1.Test & Inspection: API598/EN12266
Features:
Leflow’sTilting disc check valve is Double Eccentric structure, normally with counterweight and hydraulic damper.
TiltingDisk Check Valves,also called butterfly check valve, is a cost-effective valve with a unique design that provides excellent tightness and minimizes water-hammering. It is designed for drinking water and other neutral liquids, and commonly installed in pumping applications to prevent backflow in the system. The opening pressure will be very low.It is mainly used for water industry, irrigation, municipal engineering, drinking water engineering and etc
Thekey benefits are as following:1.Ensures ZERO leak with the “T” section ring fixed to the outer diameter of the disc fully facing the seat surface inside the body perimeter made of stainless steel welding.2. The sealing that can be made of EPDM/NBR/VITON,which can be replaced easily on field conditions.3. Inner and outer surfaces of the valve is coated with fusion bonded epoxy.4. Low toqure can be achieved by decreasing the friction through self lubricating bushings.5. High impact resistance.6. Pressure loss is at minimum level by double shaft design.7. Counter weight allows installation of both horizontal and vertical pipes on the right and left sides of the mill, counterweight, and lever on both sides of the check valve.8. The disc opens depending on the flow rate and moves freely depending on the flow.9. With the o-rings on the bearing bushings, disc pin holes are protected against corrosion (Dry shaft).
Leflow’s tilting check valvesare designed to meet the stringent demands of industrial fluid handling applications, providing reliable flow control and protection against backflow. With their robust construction, efficient operation, and versatility, Leflow tilting check valves are a trusted choice for industries requiring secure and efficientflow management solutions.
在线联系供应商
Other supplier products
 |
KNIFE GATE VALVE THROUGH CONDUIT | KNIFE GATE VALVE THROUGH CONDUIT Size:DN50 – DN600Pressure Rating: PN10 and 150LBSMaterial: DI,WCB,LCB,WC1,WC6,WC9,C5,CF3,CF3M,CF8,CF8M and ... |
 |
METAL SEAT CAST IRON GATE VALVE-JIS | METAL SEAT CAST IRON GATE VALVE-JIS Valve Size:2” – 12”Pressure Rating: 10KMaterial: FC and FCD.Design & Manufacture:JIS B20... |
 |
DIAPHRAGM VALVE WEIR TYPE | DIAPHRAGM VALVE WEIR TYPE Valve Size:DN15 – DN350Pressure Rating: PN10Material: Cast Iron(GG25),Ductile Iron(GGG50),WCB,CF8 and other Alloy ... |
 |
METAL SEAT CAST IRON GATE VALVE-JIS | METAL SEAT CAST IRON GATE VALVE-JIS Valve Size:2” – 12”Pressure Rating: 10KMaterial: FC and FCD.Design & Manufacture:JIS B20... |
 |
DIAPHRAGM VALVE WEIR TYPE | DIAPHRAGM VALVE WEIR TYPE Valve Size:DN15 – DN350Pressure Rating: PN10Material: Cast Iron(GG25),Ductile Iron(GGG50),WCB,CF8 and other Alloy ... |
Same products
 |
China Gate valve | 卖方: Yuanda Valve Group Co.,Ltd. | China Gate valve China Gate valve A is a type of valve that uses a gate or wedge-shaped dis... |
 |
Gate Valve Vs. Ball Valve | 卖方: Yuanda Valve Group Co.,Ltd. | Gate Valve Vs. Ball Valve Gate valves and ball valves are both types of valves that are used... |
 |
Non Return Valve Suppliers China | 卖方: Yuanda Valve Group Co.,Ltd. | Non Return Valve Suppliers China refers to the opening and closing member for the circular v... |
 |
Common Types Of Check Valves | 卖方: Yuanda Valve Group Co.,Ltd. | Common Types Of Check Valves A is a valve whose switching parts are disc-shaped and rely on ... |
 |
Brass ball valve | 卖方: Yuanda Valve Group Co.,Ltd. | Brass ball valve Brass ball valve Applications: Water Supply: Commonly used in residentia... |
