.

Poly (Polycrystalline Diamond Powder)

1) Properties

Detonation-synthesized polycrystalline diamond micro-powder

The structure resembles the rare natural polycrystalline black diamond, metallic-grey, superior toughness, self-sharpening.

Monocrystalline vs polycrystalline diamond:The lapping and polishing efficiency of the detonation-synthesized polycrystalline diamond micro-powder is 2 to 4 times better compared with that of the mono-crystalline diamond that is naturally occurred or synthesized via the static pressure method, Silicon Nitride, Corundum, and other abrasive materials.

polycrystalline diamond micro-powder allows the manufacturing of the smoothest surface possible:

polycrystalline diamond can maintain its dull mono-crystalline structure by releasing the outer layer, hence will produce the most scratch free surface possible.

When applied to the surface of a workpiece (for example, the inner surface of a cylinder in an engine) via chemical plating method, the wearability of the surface is superior to that of a surface treated with any other materials.

Via after-sinter technique, polycrystalline diamond micro-powder can be turned into polycrystalline diamond particles of a large size that are highly valuable in a variety of industries.

2) Application

Lapping and polishing a variety of surfaces that require superior smoothness.

Improving the wearability of a mechanical component

Via after-sinter technique can be applied in a variety of industries.

Can be made into liquid abrasives, gel abrasives, and many other types of abrasive tools that are capable of ultra-fine lapping and polishing tasks.

Industries:

Polycrystalline diamond micron powder can be used for below industries:

Computer industry: Read/Write head lapping, rigid disk media texturing

Gem polishing

Semi-Conductor, electronic ceramic, optical instruments

Used as anti-wearing media in special rubber and plastics

Chemistry catalyst, Biomedicine

With more than 20 years experience, E-Grind provides all sizes of Poly (Polycrystalline diamond micron powder) with high removal rate, superior surface finishing, and long using life. Our Quality Control Department keeps strict and careful control of raw material from lot to lot to ensure quality basis. All the products are tested during production and after processing, to make sure of quality consistency and quality traceability. The test report is attached to each shipment for customers reference.

Available Sizes:

0-0.15, 0-0.2, 0-0.35, 0-0.5, 0.25-0.35, 0-1, 0-2, 2-4, 3-6, 3-7, 4-8, 4-9, 6-10, 6-12

Custom-made sizes are also available upon customers' demand.

E-Grind Abrasives is one of the most professional polycrystalline diamond suppliersofdiamond and CBN products with over 50 years experience. If you want to know more about the abrasive powder types, just contact us! We sincerely invite and welcome people from all around the world to invest and create more values together.



在线联系供应商

至: Henan E-Grind Abrasives Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Resin Bond Micron Diamond
Resin Bond Micron Diamond Diamond Resin bond micron The Friable type of diamond micron. Diamond Resin bond micron Is made from Diamond Resin Bond Mesh. It has a multi-crys...
Diamond Powder
Diamond Powder industrial diamond dusthas the characteristics of high thermal stability, high chemical stability, good conductivity, good physical properties (hig...
Wheel Grit Diamond
Wheel Grit Diamond EGrind's Wheel Grit DiamondSeries is the crystal type with yellow color and high transparency and low impurity content. It provides premium perform...
CBN Powder
CBN Powder The cubic boron nitride powderhas a molecular formula of BN. Its atomic structure is similar to the structure of carbon atoms in diamond. Therefore...
Poly (Polycrystalline Diamond Powder)
Poly (Polycrystalline Diamond Powder) 1) Properties Detonation-synthesized polycrystalline diamond micro-powder The structure resembles the rare natural polycrystalline black diamond, m...
供应产品

Same products

Die Grinder Bits Carbide Tooling Tungsten Carbide Burrs
Die Grinder Bits Carbide Tooling Tungsten Carbide Burrs 卖方: 株洲煜杰合金材料有限公司 Die Grinder Bits Carbide Tooling Tungstencarbide burrs Carbide Burr: Carbide rotary burr is use...
3 Flutes Solid Tungsten Carbide Chamfering Milling Cutter
3 Flutes Solid Tungsten Carbide Chamfering Milling Cutter 卖方: 株洲煜杰合金材料有限公司 3 Flutes Solid Tungsten Carbide Chamfering Milling Cutter The angle of two sides:60degree,90degre...
Diamond Quick Change Discs
Diamond Quick Change Discs 卖方: 郑州瑞特金刚石砂带有限公司 Size: Φ50mm, Φ75mm Grit: 60#~800# Description ●Taking aluminium or fiberglass as backing, diamond...
Diamond & CBN Flap Wheels
Diamond & CBN Flap Wheels 卖方: 郑州瑞特金刚石砂带有限公司 Size:Diameter: 15mm~80mm, Thickness: 10mm~50mm Grit:Diamond & CBN/60#~1500# Description ●Be t...
Diamond & CBN Discs
Diamond & CBN Discs 卖方: 郑州瑞特金刚石砂带有限公司 Size:Φ10mm~600mm Grit:Diamond & CBN/40~5000# Description ●Can be fixed on electric tools...