SKR51+ Rebar Location System
Purpose
SKR51+ rebar Location system is used to test rebar diameter, distribution, coating thickness in concrete.
Specification
JGJ/T152-2008
Performance
Longer service life of the Connector Clip: The instrument has long service life because of using Lemo Connector Clip which comes from Swiss and uses for aircraft industry.
Good quality of signal cable: The signal cable has long service life because of its flexible and substance.
High precision and stability: The instrument can locate the steel-bar accurately and quickly.
Longer service life of the sensor: Improve the service life by paste abrasion resistance allowance bottom of the sensor
Single sensor: No-change sensor in test, switching between high and low test range can assure the precision of test data and the test depth.
Display test information real-time: Display the test data directly to avoid man-made errors.
Grid and section scan mode: Instrument can display steel bar distribution and scan steel bar without concrete boundary limited.
Three-wheel steel-bar scan system: The system can assure scan path along line and the precision of test data.
Powerful Windows data process and analysis software: Software can display analysis result by diagram. Test data can be export to word or Excel easily.
在线联系供应商
Other supplier products
 |
混凝土耐久性仪器,手持式氯离子含量快速测定仪、台式氯离子含量快速测定仪、混凝土碱含量快速测定仪，混凝土氯离子电通量测定仪、混凝土氯离子扩散系数测定仪、全自动真空饱水饱盐设备、全自动混凝土快速冻融试验仪、动弹仪、混凝土碳化试验箱、混凝土电阻率测定仪、AVA空气含量分析仪 | |
 |
SK-40/60 Multifunction strength tester | Executive standard (CECS69:94) Technical specification for inspection of concrete strength by pull-out post-insert method (JGJ 110-2008) Testing st... |
 |
SK225-S digital voice test hammer | Brief introduction: NJ225-S test hammer submit to standard of GB/T9138-1988 and JJG817-93 and JGJ/T23-2001. Automatically calculate data and on sit... |
 |
SKCK-2 Crack Width Measurement Instrument | Description: SKCK-2 crack width measurement instrument a new professional concrete structure measurement instrument for the crack width and the mic... |
 |
SK-225 concrete test hammer | Brief introduction: The test hammer submits to standard of GB/T9138-1988 and JJG817-93 and JGJ/T23-2001. NJ-225 concrete test hammer is applied to ... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
