Temperature Cycling Test Chambers
Temperature Cycling Test Chambers
Fast change rates test chamber
Temperature Cycle Test Chamber
Fast change rates testing chamber is suitable for testing the changes of instruments,electrical,electronic products,machineandpartsundertherapidtemperaturechangeorthethegradientconditions,takes advantage of compact, modern scroll compressors to bring fast temperature cycling to small form factor. Temperature cycling rates from 5 to 20°C/min. are possible. Two different ultimate low temperatures are available: -40°C or -70°C.
The faster cycle times can be used to meet more aggressive test methods that require thermal stress during transitions. Significant test time can be saved in completing tests, as well.
To demonstrate performance, Grandeuses the international standard IEC 60068 3-5 measured at the supply air. Temperature cycles are run from hot to cold extremes, and the middle 80% of the transition is timed to determine performance. Your actual cycling results will vary depending on methodology, including the start and end temperatures, and the amount of samples loaded.
Features
QUALITY CONSTRUCTION
Stainless steel exterior and interior
Rounded interior corners for easy cleaning
Full thermal break around doorframe and door
Rotating door latch is easy and secure
Dual-layer insulation of fiberglass and expanded foam for thermal integrity
One 2" (50mm) to One 4" (100mm) diameter cable port on the left, with an impervious, flexible silicone plug
Easy lift-off service panels
Pressure relief port to allow air volume changes due to rapid temperature changes
Three levels of overheat protection
FTFPROGRAMMER/CONTROLLER
Popular PID controller with touch-screen operation
Stores 120 different profileswith up to 1200 steps each (ramp, soak, jump, auto-start, end)
Step types include: ramp, soak, jump, auto-start, and end
Ethernet interface for remote monitoring and operation
RECOMMENDED OPTIONS
Dry air purge, to compensate for quickly shrinking air during cooling, as well as to reduce risk of condensation.
Product temperature control, allows feedback from a second sensor on the product. Ensures faster completion of transition steps.
Technical parameters：
|
Model No |
GTC-225 |
GTC-306 |
GTC-408 |
GTC-800 |
GTC-1000 |
|
|
Working room(L) |
225 |
306 |
408 |
800 |
1000 |
|
|
Working room(L) |
500*750*600 |
600*850*600 |
600*850*800 |
1000*1000*800 |
1000*1000*1000 |
|
|
Inner chamber size(mm)W*H*D |
1500*1930*1550 |
1600*2030*1550 |
1600*2030*1750 |
2100*2280*1950 |
2100*2280*1950 |
|
|
320 |
350 |
400 |
600 |
700 |
||
|
Testing temperature range |
-70～-150℃(KS)；-40～-150℃(KL)；-20～150℃(KR) |
|||||
|
RapidChangesTemp.Range |
-70℃：-50～+85℃(KS)；-40℃：-20～+85℃(KL)；-20℃：0～+85℃(KL) |
|||||
|
Heating&CoolingRate |
3°C/min,5°C/min,8°C/min,10°C/min,15°C/min,20°C/min,25°C/min,,30°C/minlinearaverageornonlinearaverage |
|||||
|
Performance |
Temperature range |
-80℃，-73℃，-60℃-40℃，-20℃，0℃，+150℃，+180℃,+200℃ |
||||
|
Humidity range |
20%RH～98%RH(10%RH～98%RHor 5%RH～98%RH) |
|||||
|
±2.0℃ |
||||||
|
±1.5℃ |
||||||
|
Heating rate |
-70～150℃<60min;-40～150℃<50min;+20～150℃<35min |
|||||
|
Cooling rate |
+20～-70℃<70min;+20～-40℃<55min;+20～-20℃<35min |
|||||
|
Material |
Exterior chamber material |
Stainless steel plate+ powder coated |
||||
|
Inner chamber material |
SUS#304 stainless steel plate |
|||||
|
Insulation Material |
PU & Fiberglass wool |
|||||
|
System |
Air circulation system |
Cooling fan |
||||
|
Fan |
Sirocco fan |
|||||
|
Heating System |
SUS#304 stainless steel high-speed heater |
|||||
|
Air flow |
Forced Air Circulation(It enters at bottom and leaves at top) |
|||||
|
Humidification system |
Surface evaporation system |
|||||
|
Refrigeration system |
Imported compressor,Tecumseh compressor,finned type evaporator,air(Water)-cooling condenser |
|||||
|
Refrigerating fluid |
R23/ R404AUSA Honeywell. |
|||||
|
Condensation |
Air(Water)-cooling condenser |
|||||
|
Dehumidifying system |
ADP critical dew point cooling/dehumidifying method |
|||||
|
Controlling system |
PID Digital electronic indicators+S.S.R.With PID automatic calculation capability |
|||||
|
Operation interface |
Grande Expertise in Temperature & Humidity Controller,Chinese-English Shift. |
|||||
|
Controller |
Programmable capability |
Save 120profiles with up to 1200steps each |
||||
|
Setting range |
Temperature：-100℃+300℃ |
|||||
|
Reading accuracy |
Temperature：0.01℃ |
|||||
|
Input |
PT100 or T Sensor |
|||||
|
Control |
PID control |
|||||
|
Communication interface |
Equipped with standard communication interface devices USB,RS-232 and RS-485,enable the test chamber to be connected with personal computer(PC),to achieve multi-machine control and management at the same time.Standard: USB external memory port.Optional: RS-232, RS-485, GP-IB, Ethernet |
|||||
|
Print function |
Japan Yokogawa Temperature Recorder(Optional accessories) |
|||||
|
Auxiliary |
Limit Alarm,Self Diagnosis,Alarm Display(Failure Cause),Timing device(Automatic Switch) |
|||||
|
Accessories |
Multi-layer vacuum glass observation window,Cable port(50mm),Controlling status indicator lamp,Chamber light,Specimen loading shelf(2pcs,position adjustable)，Guaze 5pcs,Operation manual 1 set. |
|||||
|
Safety protection device |
Over-heat protection circuit breaker,Compressor overload protection,Control system overload protection,Humidifying system overload protection,Overload indicator lamp. |
|||||
|
Power supply |
AC 1Ψ 110V;AC 1Ψ 220V;3Ψ380V 60/50Hz |
|||||
|
Customized service |
Welcome to Non-standard,Specail requirements,OEM/ODM orders. |
|||||
|
The technical information will be subjected to change without notice |
||||||
Optional accessories
1,Inner glass door with manual operating ports.
2,Temp./Humi.Recorder.
3,RS-485 interface can be linked to Personal computer(PC) and achieve multi-level control & recording software management.
4,Liquid nitrogen(LN2)/Liquid Carbon Dioxide(LCO2) fast cooling-down system.
在线联系供应商
Other supplier products
|
|
Temperature Cycling Test Chambers | Temperature Cycling Test Chambers Fast change rates test chamber Temperature Cycle Test Chamber Fast change rates testing chamber is suitable fo... |
 |
Alternate salt corrosion spray test chamber | Alternate salt corrosion spray test chamber Salt Corrosion Spray Test Chamber Salt Spray Test Chamber Configured for your specific tests Altern... |
 |
Xenon Water-Cooling Aging Test Chamber | XenonWater-Cooling AgingTest Chamber UV Aging Test Chamber Ozone Aging Chamber XenonWater-CoolingAging Test Chamber,is designed to simulate full... |
 |
High altitude low pressure simulation test chamber | High altitude low pressure simulation test chamber Altitude Chamber For Sale Altitude Test Chambers Temperature testing at altitudes up to 100,0... |
 |
3-layers temp humi test chamber | 3-layers temp humi test chamber Programmable Temperature And Humidity Test Chamber Temperature Humidity Test Chamber It is applied to test the m... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
