.

Qinsun Dry Cleaning and Washing Cylinder

Dry Cleaning and Washing Cylinder, to determine color fastness to drycleaning and chlorinated pool water(AATCC 162), and applied to prepare samples for flammability testing of standard 16CFR-1610. Dry Cleaning and Washing Cylinder complies with AATCC 162, 16CFR-Part1610, etc.
Dry cleaning and washing cylinder is designed to determine the color fastness for the dry cleaning and chlorinated pool water, with the aim to prepare samples for flammability testing.

Standards
AATCC 162 Colorfastness to water: Chlorinated pool.
16CFR PART 1610 Standard for the flammability of clothing textiles.

Operation
● Clean the dry cleaning cylinder
● prepare the hardness concentrates according to the relevant standards.
● 51 ml of the hardness concentrate was diluted to 5100 ml with distilled or deionized water.
● If necessary, adjust the pH of the solution to 7.0 with sodium carbonate or acetic acid.
● 5000 ml of the solution (made in the above 3) was charged into a dry-cleaning cylinder. The temperature was adjusted to 21 ° C.
● Put the color test sample with the standard test fiber into the cylinder, turn off the barrel, and roll for 60 minutes.
● Get out the sample and remove the excess solution.

Technical Parameters
Items Parameters
Dimension 72L X 49W X 62H (cm)
Structure Stainless steel
Surface treatment Wiredrawing treatment
Transport weight 80kg
Power supply 220V 50HZ max.0.05A


在线联系供应商

至: 千实精密机电仪器检测设备有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Slip Resistance Tester
Slip Resistance Tester TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
Dry Wet rubbing fastness Tester
Dry Wet rubbing fastness Tester Testing Standards:ASTM F1319, AATCC 8/165, BS 1006 D02, GB/T 3920, ISO 105 D02/X12, JIS L0849, M&S C8/C8A, NEXT TM6Applications:Electronic Croc...
Spray Tester
Spray Tester Spray Rating Tester Testing Standards: ISO 4920, BS EN 24920, BS 3702, GB/T 4745, AATCC 22, M&S P23, NEXT 23 Applications: Spray Rating Tes...
Mask Tensile Testing Machine
Mask Tensile Testing Machine IntroductionThe test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration mec...
Steaming Cylinder
Steaming Cylinder SteamingCylinderTestingStandards:ISO3005,BS4323,NEXTTM15,M&SP8,IWTO29-76Applications:Usedforsteamingshrinkagetestoffabric,meanwhilecanperformre...
供应产品

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 卖方: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
Surface Performance Tester STD-FB4 - A 卖方: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A 卖方: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH 卖方: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S 卖方: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...