Battery combustion tester
Equipment introduction
Battery combustion tester used for battery fire resistance, battery combustion
injection test. The battery combustion testing machine is to fix the screen at 38.1mm
above the top of the burner, the screen has 20 holes every 25.4mm, the steel wire
diameter is 0.43mm, ignite the burner, and observe the battery burning until the
battery explodes or the battery burns, and time the combustion process.
Meet the standard
UL2272-2016, UL2271-2013, GB/T31241-2014, GB/T18287-2013, GBT 8894.4-2008,
YD/T 2344.1-2011, GB/T31485-2015, etc.
Technical parameter
1. Burner: Bunsen burner, the inner diameter of the tube is 9.5mm, the length is
about 100 mm
2. Flame application time :0-999.9 s 0.1 s
3. Test round hole surface diameter :102mm
4.Test mesh screen: A mesh screen consisting of 0.43mm(0.017inch) diameter
stainless steel wire woven with 20 mesh per US inch
5. Flame distance from screen height :38mm
6. Octagonal net cover width: the distance between each side is 24 "（610mm），
octagonal, and the eight sides are movable for easy replacement and disassembly
7. Octagonal net cover height :12 "（305mm）
8. Octagonal cover material: aluminum mesh, consisting of 0.010inch（0.25mm）
diameter of aluminum wire woven into a net containing 16-18 mesh per inch
9. Protective box size: about 730x740x500mm
10. Box material: inner box stainless steel, high temperature resistance,
insulation, corrosion resistance, outer box cold rolled steel paint treatment
11. Visual observation window :150x150mm, multi-layer tempered glass and
equipped with stainless steel mesh
12. Ventilation: The rear side of the box has a fan and ventilation inside the box
13. Combustion gas: methane or LPG （customer's own）
14. Power supply :AC220V, 50Hz
15. Equipment weight: about 100kg
在线联系供应商
Other supplier products
 |
Car seat frame durability tester | Applicable standards: GB 11550-2009 "Performance requirements and test methods for car seat headrest" : Appendix B of this standard specifies the ... |
 |
Car seat foam performance tester | Applicable standards: GB/T 6670-2008 "Determination of falling ball resilience of soft foam polymeric materials" : This standard specifies the tes... |
 |
Velcro Fatigue Tester | Product Information: Velcro Fatigue Testeris designed for opening and closing the hook and loop fasteners, A hook and loop fastener is repeatedly ... |
 |
Negative pressure tester for medical syringes | Main use The negative pressure tester is mainly used to test the physical characteristics of the body of the syringe, and is one of the impor... |
 |
Rainproof Tester | Rainproof tester can detect the water repellency of fabrics or composite materials under different rain pressures. Product details: This instrume... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
