Scorch Tester Sublimation fastness tester
In the daily process of shaping and high temperature ironing, dyes heat stability will affect the appearance of fabrics.. Dyes heating , heat transfer properties will cause the change of fabric color.
Sublimation fastness tester (large) is used to determine the hot pressing ironing and dry heat (sublimation) color fastness properties for all kinds of dyed printing material and fabrics, it also can be used for determination the resistance to chlorine damage, textile bleaching products, scorch yellowing test, disperse dye sublimation fastness test, dye fastness test, high temperature dimensional stability. It is commonly used in printing and dyeing fabrics, textile auxiliaries clothing industry.
Standard
GB/T 5718.GB/T 6152.JIS L0879.JIS L0850.ISO 105 P01.ISO 105 X11.AATCC 117.AATCC 133. AATCC 92(G247)，AATCC 114(G247)，M&S C13(G247B)，M&S C10(G247B)
Features
Single work station easy for operation, high cost performance, Multi work station type can raise the efficiency and also meet M&S standard.
Upper and lower heat board control temperature separately , accurate temperature control, timing alert, control testing time exactly.
Heating board distance is adjustable, suitable for specimen of different thickness, High efficient insulation material ensures the safety operation.
Technical Parameters
| Parameters | G247 | G247B |
| Heating board area | 100mm×40mm | 210mm×210mm |
| Heating board material | Aluminumplate | Aluminumplate |
| Pressure | 4kPa±1kPa | 4kPa±1kPa（Fullarea） |
| Temperature heating range | Roomtemp.-300°C | Roomtemp.-300°C |
| Temperature control stability | ±1°C | ±1°C |
| Test Application | Hotpress,dryheat,chlorinedamage | Hotpress,dryheat,dimensionstability |
| Size | W250×D300×H230mm | W345×D520×H320mm |
| Weight | 9kg | 12kg |
在线联系供应商
Other supplier products
 |
Friction Tester for Non - woven Fabrics | Compliance Standards INDA Test Method IST 140.1 Instrument DescriptionThis fabric friction tester can measure the static and kinetic friction c... |
 |
Rupture strength tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 61730: Safety Standard for Photovoltaic... |
 |
Spinal Internal Fixation System Component Testing Machine | Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and conn... |
 |
Static Honest Meter | Standards: JIS L 1094 GB/T 12703 Applications: Static Honest Meter is a measuring instrument for attenuation of static electricity, most a... |
 |
Electric notch machine | Plastic electric notch prototype is a cantilever beam, simply supported beam impact testing machine to do the impact toughness test of non-metallic... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
