Nanofiber electrospinning device
The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easily produce nanofibers with diameters of 50 to 800 nm. This device is widely used in the automotive industry for research and development of filters and fuel cells.
The Nanofiber Electrospinning Unit is capable of producing 50 to 800 nm diameter fibers. The device’s biggest feature is the ability to produce nanofibers easily from a small amount of various polymers using an electrospinning technique. Currently, use of nanofibers in raw materials, IT, biotechnology, and healthcare industries is expected to increase dramatically as manufacturers look to take advantage of increased surface area and finer fiber materials.
Main features:
Spinning high uniform, high quality nanofibers
By constructing a stable electric field using our unique technology, nanofibers with high fiber diameter uniformity and a small number of droplets can be spun.
1. Ten-key easy programming
High pressure, solution volume, feed speed, syringe diameter, collector rotation speed, spinneret width, lateral speed, cleaning frequency/interval and other parameters can be easily programmed using ten keys.
2. Easy to load and unload system components
Both spinnerets and collecting plates can be replaced and installed quickly and easily.
3. Rotate the highly oriented orientation film
With the optional φ20 0mm drum dust collector or disk dust collector, highly oriented films can be produced （orientation angles of 5 degrees or less depending on the material）。
4. Equipped with automatic cleaning mechanism
Equipped with needle cleaning mechanism, frequency and interval can be programmed.
5. Thorough security measures
Thorough safety measures such as door interlock, emergency stop function, indicator light, tempered glass, high speed cut-off high pressure.
Technical parameters:
Product Name |
Nanofiber Electrospinning Unit |
| Dimensions (W×D×H) *approx. | 900×750×1080 mm (Including pilot lamp) |
| Weight *approx. | 120 kg |
| Power supply, Frequency | 100VAC, 50/60Hz |
在线联系供应商
Other supplier products
 |
Fabric vertical burn tester | Fabric vertical burn tester - Flammability Testing equipment price quotation - standard Standards: ASTM D6413, CALIF TB117, DOC-FF 3/71, 16CFR ... |
 |
Metal Corrosivity Tester | Scope of Application The metal corrosivity tester is designed and manufactured in line with the requirements stipulated in the national standard o... |
 |
Thermal Contact Resistance Testing Apparatus AQ 6103-2007 | Standards: AQ 6103-2007 Protective gloves for welders. Appendix E Testing method for thermal contact resistance. Applications: Product Informati... |
 |
Photovoltaic module outdoor exposure test system | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61730: Photovoltaic (PV) Module Sa... |
 |
Standard Helmet Visual Field Tester | Standard EN 1078:2023: Helmets for Pedal Cyclists, Skateboarders, and Roller Skaters CE Certification(Conformité Européenne) Equ... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
