Thermal cycle wet freezing testing machine
Standard
IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
UL 1073: Standard for Safety for Enclosures for Electrical Equipment
ISO 16750-4: Road Vehicles – Environmental Conditions and Testing for Electrical and Electronic Equipment
CE Certification(Conformité Européenne)
Product Advantages
Extreme Environmental Simulation
-40°C to +85°C Range: Replicates Arctic cold to desert heat in a single chamber.
98% RH Humidity Control: Tests condensation resistance for marine/tropical applications.
Ultra-Stable Performance
±1°C Temperature Stability: Ensures consistent testing across 1.000+ cycles.
≤±2°C Uniformity: Patented airflow design eliminates hot/cold spots.
Rapid Transient Response
IEC 61215-Compliant Ramps: 10°C/min heating, 7°C/min cooling (customizable).
Auto-Tuning PID: Adapts to payload changes in real-time.
Energy Efficiency
40% Lower Power Consumption: Advanced insulation and heat recovery systems.
ECO Mode: Auto-powers down during stabilization phases.
Safety First
Dual Overload Protection: Thermal cutout and current-limiting circuit breaker.
Door Interlock System: Prevents accidental chamber access during testing.
Product Features
Dual-Chamber Design: Isolated wet/dry zones for simultaneous multi-condition testing.
10” Touchscreen HMI: Preloaded IEC/UL test profiles with customizable hold times.
Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts.
Self-Diagnostics: Real-time sensor health checks and error logging.
Glovebox Compatibility: Oxygen/moisture control for sensitive electronics testing.
Technical Parameters
| Parameter | Specification |
|---|---|
| Temperature Range | -40°C to +85°C (operational) |
| Temperature Fluctuation | ≤±1°C |
| Temperature Deviation | ≤±1°C (at steady state) |
| Temperature Uniformity | ≤±2°C (empty chamber) |
| Heating Rate | 10°C/min (typical, configurable) |
| Cooling Rate | 7°C/min (typical, configurable) |
| Humidity Range | 30%–98% RH (non-condensing) |
| Humidity Deviation | ±3% FS (at 85% RH ±2%, 90% RH ±2%) |
| Chamber Volume | 500L (standard), expandable to 1,500L |
| Power Supply | 380V/415V 3-phase, 50/60Hz |
| Dimensions | 1,200mm (W) × 1,800mm (D) × 2,000mm (H) |
| Weight | 800 kg (net) / 1,200 kg (gross) |
Accessories Included
Testing Kit:
4x universal sample racks (adjustable for batteries/PV modules/PCBAs).
10x humidity sensor calibration capsules.
Software Suite:
License key forEnviroTest Pro(Windows/Linux).
1-year free access to cloud-based test report generator.
Calibration & Safety:
NIST-traceable temperature/humidity logger.
Emergency eyewash station (portable).
Maintenance Kit:
Spare heating elements and refrigerant filters.
Chamber cleaning solution (non-corrosive).
Documentation:
Multilingual quick-start guide (printed + digital).
Compliance certificates for IEC/UL/ISO standards.
在线联系供应商
Other supplier products
 |
Powder Wet Vibrating Screen System For Lithium Battery Material Testing | Standard ASTM E11: Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves ISO 3310-1: Test Sieves – Technical Requirement... |
 |
Heel impact fatigue testing machine | Main uses: Heel impact fatigue testing machine is mainly used to test the continuous impact tolerance index of women's high heels, mid-heels and o... |
 |
Leather Rubbing Colorfastness Tester | Introduction In daily life, leather products, such as leather clothing, purses, leather shoes ,etc., produce friction with their own or human body... |
 |
Methyl Polysilazane Precursor Ceramic Resin STD-8808 | Introduction STD8808 is a side-methyl 100% solid-content polysilazane resin that rapidly cures via heating. The cured resin exhibits excellent adh... |
 |
Hydraulic oil purification and filtration tester | Meet the standard: ISO 16889 ISO 4406 ASTM D7619 ISO 11500 Product Introduction: Hydraulic oil purification and filtration testers are esse... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
