Mechanical load testing machine for photovoltaic modules

Standard

• IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
• IEC 61646: Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
• IEC 62782: Dynamic Mechanical Load Testing for Photovoltaic Modules
• UL 1703: Flat-Plate Photovoltaic Modules and Panels
• CE Certification(Conformité Européenne)

Product Advantages

1. Multi-Standard Compliance
   • 5,400 Pa Forward / 2,400 Pa Reverse Loading: Replicates snow/wind loads per IEC 62782.
   • 1,000 Pa Dynamic Testing: 1,000-cycle fatigue simulation for hail/debris impact.
2. Ultra-Precise Control
   • 0.1N Force Feedback: Low-friction cylinder ensures ±5% pressure accuracy.
   • 7+3s Cycle Timing: Mimics real-world pulsating wind loads.
3. Automated Testing
   • Programmable Cycle Count: 1–99,999 cycles with auto-stop at failure.
   • AI-Powered Failure Detection: Real-time EL imaging correlation for crack analysis.
4. Safety First
   • Emergency Shutoff: Dual redundant safety circuits with load cell override.
   • Overload Protection: 6,000 Pa max pressure cutoff.
5. Modular Design
   • Quick-Change Fixtures: Adapts to framed, frameless, and flexible PV modules.
   • Expandable Test Area: Up to 3.0m × 2.0m for large-format modules.

Product Features

• Dual-Mode Operation: Static/dynamic load testing with auto-switching.
• 10” Touchscreen HMI: Preloaded IEC/UL test sequences with customizable pressure profiles.
• Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for failures.
• Self-Calibrating System: Auto-tare and linearity checks before each test.
• Rust-Resistant Frame:304 stainless steel construction with epoxy coating.

Technical Parameters

Parameter	Specification
Test Area	2.8m (L) × 1.8m (D) × 1.95m (H)
Forward Load	5,400 Pa (adjustable)
Reverse Load	2,400 Pa (adjustable)
Dynamic Load	1,000 Pa, 1,000 cycles (7s+3s timing)
Pressure Accuracy	±5% of setpoint
Force Sensor	0.1N resolution, 10 kN capacity
Power Supply	230V AC, 50/60Hz (single-phase)
Air Supply	6–8 bar (clean/dry air required)
Weight	1,200 kg (net) / 1,500 kg (gross)

Accessories Included

1. Testing Kit:
   • 4x PV module clamping fixtures (adjustable for 16–40 mm frames).
   • 10x load distribution pads (anti-skid rubber).
2. Software Suite:
   • License key forLoadTest Pro(Windows/Linux).
   • 1-year free access to cloud-based fatigue analysis tools.
3. Calibration & Safety:
   • NIST-traceable pressure gauge.
   • Safety harness kit for large modules.
4. Maintenance Kit:
   • Spare O-rings and cylinder seals.
   • Machine cleaning solution (non-corrosive).
5. Documentation:
   • Multilingual quick-start guide (printed + digital).
   • Compliance certificates for IEC/UL/ISO standards.

Other supplier products

	Dry and Wet Retroreflectometer	Introduction： A retroreflectometer is a device used to measure how well a surface reflects light back to its source. This is really important for ...
	Wascator FOM 71 CLS Lab Washer - Extractor ISO 5077/6330	Standards: ISO 5077/6330. M&S P1/P1A/P3A/P12/P91/P99/P99A/P13. BS EN25077/26330. NEXT TM7/7A/7B/TM12. GB/T 8629. IWSTM 31. IEC 456 Applicatio...
	Putty sanding tester	Standard: GB/T 1770 How it works: By placing the sample of primer and putty to be measured on the rotating grinding wheel （or grinding head）， ...
	Pipe drop hammer impact testing machine	Pipe drop hammer impact testing machine - Other test instrument - standard Product Information: Product Introduction: 1. Name: drop hammer impac...
	Strip evenness tester	Product Information: Cotton yarn fiber strip analyzer is a high performance, high test efficiency of textile laboratory instrument, it is used to ...

供应产品

Same products

	Air Permeability Tester STD- F8	卖方: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	卖方: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	卖方: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	卖方: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	卖方: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...