Spinal Internal Fixation Components System Tester

Standard

• YY/T 0961-2014 (China): Specifies static/fatigue testing protocols for spinal fixation systems, including connection integrity and anti-loosening performance.
• ASTM F1798-17 (International): Defines methodologies for evaluating the mechanical performance of spinal implant interconnections under cyclic loading.
• ISO 12189-1: Additional compliance for connection durability testing in spinal implant assemblies.

Product Advantages

1. Universal Interconnection Testing: Modular fixturing accommodates screw-rod, plate-screw, and hook-rod connections.
2. Multi-Axis Load Application: Simultaneous axial/torsional/shear loading replicates complex physiological stresses.
3. Anti-Loosening Detection: High-precision torque sensors monitor connection degradation in real-time.
4. Biorelevant Environment: Temperature-controlled (37±1°C) lubrication bath with protein skimmer.
5. AI-Powered Analytics: Machine learning algorithms predict connection failure thresholds.
6. Regulatory Compliance: Pre-loaded protocols for FDA/CE submission requirements.

Product Features

• Electromagnetic Servo Actuators: 50 kN axial/25 Nm torsional capacity with programmable load ratios (R=0.1–10).
• 6-DOF Kinematic System: Replicates flexion/extension, lateral bending, and axial rotation (±20° range).
• Dynamic Load Control: 0.1–15 Hz frequency range with programmable waveforms (sine, square, random).
• Thermal-Mechanical Chamber: -20°C to +50°C temperature control with 10–95% RH humidity.
• High-Resolution Imaging: Built-in 5MP camera system for micro-movement analysis.
• Safety Suite: Emergency stop, overload clutches, and laser-based specimen breakage detection.

Technical Parameters

Parameter	Specification
Max. Axial Force	±50,000 N (50 N resolution)
Max. Torsional Moment	±25 Nm (0.1 Nm resolution)
Angular Range	±20° (0.001° resolution)
Frequency Range	0.1–15 Hz (0.01 Hz increments)
Load Ratio (R)	0.1–10 (adjustable)
Temperature Control	-20°C to +50°C (PT1000 sensors)
Humidity Control	10–95% RH (non-condensing)
Data Acquisition	100 kHz sampling rate (16-bit resolution)
Power Requirements	220V/110V ±10%, 50/60Hz, 3,500W
Dimensions (W×D×H)	2,200 × 1,600 × 2,300 mm
Weight	1,400 kg (including environmental chamber)
Noise Level	<65 dB (A-weighted)

Accessories

1. Spinal Interconnection Fixture Kit:
   • Self-centering screw-rod clamps (3.5–7.5 mm)
   • Plate-screw locking jigs with torque calibration
   • Hook-rod alignment tools
2. Thermal-Mechanical Chamber:
   • 25L capacity with rapid cooling/heating (15°C/min)
   • 316L stainless steel interior with HEPA filtration
3. ConnectionMaster Pro Software:
   • Automated torque degradation tracking and fatigue limit calculation
   • 21 CFR Part 11-compliant audit trail with blockchain timestamping
   • Remote monitoring via iOS/Android app
4. Operator Kit:
   • Calibrated torque wrench set (0.5–50 Nm)
   • Specimen alignment gauges (ASTM F1798 compliant)
5. Calibration Bundle:
   • NIST-traceable force/torque calibration weights
   • Angular encoder verification tool
6. Safety Kit:
   • Laser safety curtains
   • Acoustic enclosure with 30 dB noise reduction

Other supplier products

	Cleanliness automatic extractor	Product Introduction: The cleanliness extraction equipment is mainly used to clean the cavity channels, blind holes, and the overall surface of th...
	Digital Fabric Thickness Gauge	Standards: Standards ASTM D1777 Standard test method for thickness of textile materials GB/T 3820 Determination of thickness of textiles and tex...
	Mask BFE Testing Machine	Mask BFE Testing Machineis used to test the percentage of material containing bacterial suspended particles at a specific flow rate. Features: ...
	Leather Vamp Flexing Extensibility Testing Machine	Applications: Vamp Flexing Tester is used to determine the propensity for materials to crack or otherwise fail at flexing creases, but can also ...
	HapLog Finger Tactile Sensor	HapLog sensor is a “sensor that measures natural finger operations” with a built-in contact force sensor and a 3-axis acceleration sens...

供应产品

Same products

	Air Permeability Tester STD- F8	卖方: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	卖方: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	卖方: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	卖方: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	卖方: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...