Water Vapor Permeability Tester

This instrument is professionally applicable to the determination of water vapor transmission rate of plastic films, composite films, high barrier materials, back-sheets, sheeting, aluminum foils, waterproof materials, and other materials used in sanitary and medical industry.

By testing the water vapor transmission rate, the technical indexes of materials could be controlled to meet the requirements for production.

Features

1. The system is controlled by micro-computer with LCD, menu interface and PVC operation panel, which could conveniently export test data, test results and test curves
2. Wide range and high-precision of automatic temperature control to support combinations of non-standard test conditions
3. The system could be extended for the water vapor transmission rate test of finished package containers by special customization
4. Reference film for fast calibration to ensure the accurate and universal test data
5. Equipped with micro-printer and RS232 port for convenient data transfer
6. Supports LystemTMLab Data Sharing System for uniform management of test results and test reports

Principle

Under a certain test temperature, a constant humidity difference is generated between two sides of the test specimen. The water vapor permeates through the specimen into the dry side and then is taken to the sensor, where proportional electric signals will be generated. The water vapor transmission rate and other parameters can be obtained by analyzing and calculating these electrical signals.

Standards

This test instrument conforms to the following standards:

ISO 15106-3. GB/T 21529. DIN 53122-2. YBB 00092003

Applications

This instrument is applicable to the determination of water vapor transmission rate of:

Basic Applications

• Film

Including plastic film, plastic composite film, paper-plastic composite film, co-extruded film, aluminized film, aluminum foil, aluminum foil composite film, and many other films.

• Sheets

Includes engineering plastics, rubber and construction materials such as PP, PVC and PVDC.

• Paper and cardboard

Includes paper and cardboard, such as aluminum foil for cigarette packaging and Tetra Pak materials

• Packaging

Includes plastics, rubber, paper, paper-plastic composites, glass and metal packaging, such as Coke bottles, Tetra Pak materials, vacuum bags, metal three-piece cans, cosmetic and toothpaste tube packaging, and jelly cups.

Technical Specifications

Specifications	Film Test
Test Range	0.001 ~ 50 g/m2·24h (standard) 0.01 ~ 1000 g/m2·24h (optional)
Number of Specimens	1
Resolution	0.1ppm
Temperature Range	5°C ~ 95°C
Temperature Accuracy	±0.1°C
Humidity Range	0%RH, 2%RH ~ 98.5%RH, 100%RH (standard is 90%RH)
Accuracy	±1%RH
Test Area	38.48 cm2
Thickness	< 1 mm (accessories required for thicker specimens)
Specimen Size	Φ100 mm
Carrier Gas	99.999% High Purity Nitrogen (outside of supply scope)
Gas Flow	100 mL/min
Gas Supply Pressure	≥ 0.12 MPas
Port Size	1/8 inch copper tubing
Instrument Dimension	500 mm (L) x 400 mm (W) x 360 mm (H)
Power Supply	220VAC 50Hz / 120VAC 60Hz
Net Weight	36 kg

Configurations

Standard Configurations

Instrument, Micro-printer, Constant Temperature Control Device, Precision Pressure Regulator for Nitrogen Cylinder, Porous Ceramic Tray, Desiccant, Round Sample Cutter and Vacuum Grease

Optional Parts

Professional Software and Communication Cable

Note

1. The gas supply port of the instrument is 1/8 inch copper tubing;

2. Customers will need to prepare for gas supply, distilled water, and salt reagent.

Other supplier products

	Mask Synthetic Blood Penetration Tester	Medical masks synthetic blood penetration tester is used to determine the resistance of medical protective masks to penetration by synthetic blood ...
	Shoe Peel Tester	Product Introduction: Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the p...
	High - speed Pellet Impact Testing Machine for Helmet Goggles	High - speed Pellet Impact Testing Machine for Helmet Goggles - Flammability Testing equipment price quotation - standard Standards: SNELL SA/K...
	织物抗皱弯曲试验机	织物抗皱弯曲测试仪是一款用于评估各种纺织织物抗皱性能的专用仪器。它模拟织物在实际使用过程中遇到的压力和温度等条件，以评估其形成和恢复褶皱的能力。 工作原理 该测试仪通常采用垂直或水平折皱恢复法。测试过程中，将织物样品放置在测试平台上，并施加规定的压力，持续规定的时间。压力释放后，仪器会记录织...
	Mask Respirator Breathing Resistance Tester	Standards: EN149-2009 section 7.15, 8.3.4, EN 13274-3, GB 19083, GB 2626, NIOSH 42 CFR Part 84, JIS/T 8151 Applications: Mask & Respir...

供应产品

Same products

	KL‑016A Benchtop High‑precision pH Meter	卖方: 科立龙电子股份有限公司ctron Co.Ltd	Product Description: Large‑screen display with high resolution and precision for con...
	Large Naïve VHH Library	卖方: AlpVHHs	Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o...
	PH-2398 pH/EC/ORP/温度 多参数测试仪	卖方: 科立龙电子股份有限公司	大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或...
	ORP-2026S 防水型 土壤ORP&温度 二合一测试仪	卖方: 科立龙电子股份有限公司	范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV...
	防水型 EC /TDS/温度三合一参数测试仪	卖方: 科立龙电子股份有限公司	范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ...