Metal Corrosivity Tester

Scope of Application

The metal corrosivity tester is designed and manufactured in line with the requirements stipulated in the national standard of the People's Republic of China, GB/T21621 Test Method for Metal Corrosivity of Dangerous Goods. It is applicable to the metal corrosivity testing of liquid substances or solid substances that may become liquid during transportation.

Main Parameters

1. Working power supply: AC220V ± 10%; 50Hz

2. Quantity of samples: Eight holes

3. Total power consumption of the whole machine: No more than 1500W

4. Temperature - control range: Room temperature ~ 100°C

5. Temperature - control accuracy: ±0.5°C

6. Condensation system: Equipped with a compressor - refrigerated circulating water tank

7. Ambient temperature: -10°C ~ 40°C

8. Relative humidity: ≤85%

Technical parameters

Operating environment	(5~40)°C, <85%RH
Temperature control range	Room temperature ~ 80°C
Temperature control accuracy	±1°C
Temperature uniformity	±0.5°C
Timing range	(0~30)days
Timing display resolution	1min
Sample container volume	3000mL, effective volume 2000mL

Other supplier products

	Auto - ignition Point Tester for Liquids	Standards: This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(200...
	Dry microbial penetration tester	Standards: ISO 22612 YY/T 0506.5 Applications: Dry microbial penetration resistance tester DMPRT is to assess the penetration resistance t...
	Coatings Shear Fatigue Tester	Standard YY/T 0988.13-2017 (China): Specifies shear fatigue testing protocols for coatings on metallic substrates, including load ratios, freque...
	Photovoltaic module outdoor exposure test system	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61730: Photovoltaic (PV) Module Safe...
	Dry microbial penetration resistance tester	DryMicrobial Penetration Resistance Testeris designed to determine determine the penetration resistance of material to bacterial on dry particulate...

供应产品

Same products

	Air Permeability Tester STD- F8	卖方: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	卖方: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	卖方: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	卖方: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	卖方: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...