Helmet Surface Protrusion Shear and Friction Tester/ helmet surface friction testing machine/ Helmet surface protrusion shear tester
In the realm of protective headgear, a helmet's primary role is to absorb and deflect impact forces to safeguard the wearer's head. However, the external surface of a helmet plays a crucial, yet often overlooked, role in rotational injury prevention. When a helmet strikes a surface at an angle, any protrusions or high-friction areas on its exterior can create rotational forces that transmit harmful shear and torsion to the head and brain. This is precisely why the Helmet Surface Protrusion Shear and Friction Tester is an indispensable tool in modern helmet safety assessment.
Purpose
The Shear Force and Friction Tester for Helmet Surface Protrusions is mainly used to test the shear force and friction performance of the protrusion structures on the helmet surface.
Main Uses
Produced according to helmet related standards, it is mainly used to test the shear force and friction performance of the surface raised structure of motorcycle helmets and electric vehicle helmets. Widely used in various helmets related production, scientific research, quality supervision and testing units.
Main features
1. PLC touch screen control.
2. Horizontally oriented carrier with exchangeable installation of sandpaper and cutter.
3、Head type can be rotated 360.
4、Equipped with professional speed measuring tooling.
Main indicators
1. friction sandpaper: 300mm-303mm long, grade 80 aluminum oxide coated sandpaper.
2. steel cutter: 6mm high, 25mm wide, the top edge of the cutter is chamfered with a radius of 1mm.
3、Impact weight: 15kg-15.5kg
4、Weight fall height: 0-1000mm.
5、Pre-loaded weight: 400N-410N.
6、Sensor range: 0-120mm.
7、Power supply of the instrument: 220V 50Hz.
Applicable standards
GB811. ECE R22.05
在线联系供应商
Other supplier products
 |
Static Acid Pressure Tester | Static Acid Pressure Tester - Textile and Apparel - standard Standards: GB 24540-2009《protective clothing against liquid acids and alkalis 》App... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact a... |
 |
G259A Sweating Guarded Hotplate-EN ISO11092 ASTMF1868-09 | Standards: GB/T11048. ISO11092. ASTMF1868-09. BS8515. ASTMD1518-2014. JIS L1096-2010. ASTM F 1868-02 Product Information: G259A Sweating Guarded... |
 |
Wet leakage current test system of photovoltaic module | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovol... |
 |
Respirator Fit Tester | PortaCount Respirator Fit Tester:Qinsun assesses the overall integrity of masks by performing an aerosol leak test utilizing the PortaCount Respira... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
