Mechanical load testing machine for photovoltaic modules
Standard
IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
IEC 61646: Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
IEC 62782: Dynamic Mechanical Load Testing for Photovoltaic Modules
UL 1703: Flat-Plate Photovoltaic Modules and Panels
CE Certification(Conformité Européenne)
Product Advantages
Multi-Standard Compliance
5.400 Pa Forward / 2.400 Pa Reverse Loading: Replicates snow/wind loads per IEC 62782.
1.000 Pa Dynamic Testing: 1.000-cycle fatigue simulation for hail/debris impact.
Ultra-Precise Control
0.1N Force Feedback: Low-friction cylinder ensures ±5% pressure accuracy.
7+3s Cycle Timing: Mimics real-world pulsating wind loads.
Automated Testing
Programmable Cycle Count: 1–99.999 cycles with auto-stop at failure.
AI-Powered Failure Detection: Real-time EL imaging correlation for crack analysis.
Safety First
Emergency Shutoff: Dual redundant safety circuits with load cell override.
Overload Protection: 6.000 Pa max pressure cutoff.
Modular Design
Quick-Change Fixtures: Adapts to framed, frameless, and flexible PV modules.
Expandable Test Area: Up to 3.0m × 2.0m for large-format modules.
Product Features
Dual-Mode Operation: Static/dynamic load testing with auto-switching.
10” Touchscreen HMI: Preloaded IEC/UL test sequences with customizable pressure profiles.
Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for failures.
Self-Calibrating System: Auto-tare and linearity checks before each test.
Rust-Resistant Frame:304 stainless steel construction with epoxy coating.
Technical Parameters
| Parameter | Specification |
|---|---|
| Test Area | 2.8m (L) × 1.8m (D) × 1.95m (H) |
| Forward Load | 5.400 Pa (adjustable) |
| Reverse Load | 2.400 Pa (adjustable) |
| Dynamic Load | 1.000 Pa, 1.000 cycles (7s+3s timing) |
| Pressure Accuracy | ±5% of setpoint |
| Force Sensor | 0.1N resolution, 10 kN capacity |
| Power Supply | 230V AC, 50/60Hz (single-phase) |
| Air Supply | 6–8 bar (clean/dry air required) |
| Weight | 1.200 kg (net) / 1.500 kg (gross) |
Accessories Included
Testing Kit:
4x PV module clamping fixtures (adjustable for 16–40 mm frames).
10x load distribution pads (anti-skid rubber).
Software Suite:
License key forLoadTest Pro(Windows/Linux).
1-year free access to cloud-based fatigue analysis tools.
Calibration & Safety:
NIST-traceable pressure gauge.
Safety harness kit for large modules.
Maintenance Kit:
Spare O-rings and cylinder seals.
Machine cleaning solution (non-corrosive).
Documentation:
Multilingual quick-start guide (printed + digital).
Compliance certificates for IEC/UL/ISO standards.
在线联系供应商
Other supplier products
 |
Computer-controlled Helmet Impact Tester | Application Scope This testing instrument is applicable to the impact - energy absorption performance test of helmets. It is used to evaluate the ... |
 |
Shoes Sole Bending Resist Testing Machine | Applications: Bennewart Flex Tester is used to test outsole flexing resistance by flexing the outsole at a certain speed and angle. The shoe out... |
 |
Photovoltaic module outdoor exposure test system/ photovoltaic weathering station/ IEC 61215 outdoor test system/ Solar panel outdoor exposure testing | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61730: Photovoltaic (PV) Module Sa... |
 |
Mask Breathing resistance testing machine | Standards: EN149-2009 section 7.15, 8.3.4, EN 13274-3, GB 19083, GB 2626, NIOSH 42 CFR Part 84, JIS/T 8151 Applications: Mask Breathing re... |
 |
Medical Mask Differential Pressure Tester EN 149 EN 14683 | Standards: EN 149. EN 14683. ASTM F2100. MIL-M-36954C, GB 19083. GB 2626. YY/T 0969-2013 Applications: Medical Mask Differential Pressure Tester... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
