SKTJ-10 carbon fiber adhesive strength tester
Executive standard
CECS 146:2003 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate
Product introduction:
This instrument is recommended product of CECS 146:2003 Technical specification for strengthening concrete structures with carbon fiber reinforced polymer laminate, suitable for testing the adhesive strength between carbon fiber reinforced polymer laminate and concrete in the civil construction structure. According to the adhesive strength and the destroy form, it can instantly obtain the test results.
Features:
New structure, outstanding advantage, convenient operation, with adhesive standard block conversion curves, the intensity (MPa) and force value (KN) is convertible
Digital meter features: liquid crystal display, direct force reading, peak holding, data storage, curve correction, automatic shutdown
Configuration:
1. Host
2. Digital pressure meter
3. Testing accessories
4. Drawing test blocks (9pcs standard configuration)
Technical parameters:
Main technical parameters
Maximum tension: 10kN range: 10mm
Nominal oil pressure: 25MPa
Displacement and speed ratio: 0.14mm/n
Resolution: 0.01MPa
Measurement accuracy: 1.5%
Standard test block specification: Φ 40mm
Host weight: 2.3 kg
Send product request
Other supplier products
 |
SKZY-50/100 anchor shank tension tester | Executive Standard GB50367-2006 Design code for strengthening concrete structure Description: The instrument is suitable for testing the anchorage ... |
 |
SKSJ-10 tapestry brick adhesive strength tester | Executive Standard JGJ110-2008 Testing standard for adhesive strength of tapestry brick of construction engineering JGJ126-2000 Specification for c... |
 |
SK-75 brick test hammer | Brief introduction: Submit to standard of GB/T50315-2000, the instrument is applied to test light material such as brick, light bone concrete etc. ... |
 |
SKAL-H Rapid Concrete Alkali Tester | Detection method: ISE (Ion Selective Electrode) Test indicators: the alkali content of concrete and raw materials, means the equivalent content of ... |
 |
SK-40/60 Multifunction strength tester | Executive standard (CECS69:94) Technical specification for inspection of concrete strength by pull-out post-insert method (JGJ 110-2008) Testing st... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
