1000L UV Accelerated Weathering Environmental Test Chamber/Ultraviolet Test Machine/UV Aging Test Ma

gh temperature to test the material for weathering. It uses UV lamps to simulate the radiation effect of sunlight, and simulates dew and rain through condensation and water spray. In just a few days or weeks, the UV irradiation equipment can reproduce the damage that takes months or even years to occur outdoors, including fading, color change, loss of gloss, chalking, cracking, crazing, wrinkling, blistering, brittleness, strength reduction, oxidation, etc. The test results can be used to select new materials, improve existing materials, or evaluate changes in material formulations.

Fetures

1. To irradiance, temperature, time and other important test parameters to provide comprehensive and detailed real-time monitoring and curve records (controller with paperless recorder function), through the computer can also generate reports and curve printing.

2. Irradiation/condensation/water spray test can be conducted separately, and any combination of irradiation/condensation/water spray test can be programmed.

3. Adopt South Korea Sanyuan level 5.7 inch true color touch screen control system, which has good stability, monitoring, operation and maintenance.

4. Provide life reference for the imported UV lamp with expensive material (the lamp is consumable and the life is about 1600 hours), which is convenient for users to confirm the replacement time of the lamp and save the cost of use. Through irradiance measurement and control device (by adjusting the voltage), irradiance can be measured and controlled, so that the irradiance is automatically stabilized at the set value and the service life of the lamp is greatly extended.

5. Adopt automatic water supply and drainage design, and match with high power water mercury of higher cost, to ensure the flow rate and uniformity of water spraying.

6. Most of the main components use international brands, and a small part uses domestic brands to improve the safety and reliability of the product. (For details, please refer to the attached list of main components.)

7. The installation and wiring of the electrical part of the equipment are executed in accordance with international electrical standards.

8. Perfect professional after-sales service.

Test

IEC61215. ASTM D4329.D499.D4587.D5208.G154.G53; ISO 4892-3.ISO 11507; EN 534; BS 2782; JIS D0205; SAE J2020.ect.

Test theory:

UV accelerated aging test chamber can simulate the damage of sunshine, rain, dew to the material quickly and exactly. Damage types including bleaching, discoloration, loss of light, powder, crack, turbidity, bubble-based, embrittlement, strength decline and oxidation need to be engenderd in months or years but can engender in a few days or weeks.

Technical parameter

Inside dimension	1000*1000*1000mm
UVA-340 irradiance range	0.45 ~ 2W/m2 adjustable
Lamp type	standard UVA-340 (315 ~ 400nm) lamp 8
Center distance of the lamp	70mm
The distance between the test article and the center of the lamp	50±3mm
Irradiation intensity	according to the set light intensity output
Temperature range	room temperature +10～70℃ adjustable
Humidity range	≥95%RH
Temperature fluctuation	±3℃
Temperature resolution	0.1℃
Light source	8 rated at 40W UV fluorescent lamps with UVA-340 light source
Controller	Korea TIMI880 programmable touch screen controller
Display	5.7-inch true color touch screen
Operation mode	Program mode, fixed value mode
Setting mode	Chinese/English menu, touch screen input
Sensor type	PT100 sensor (optional electronic sensor); 8-way switch signal auxiliary input;
Temperature, saturation temperature measurement range	(-90℃ - 200℃, error ± 0.2℃);
Program editing	120 groups of programs can be programmed, with a maximum of 100 segments per group
Air pressure	86~106kpa
Material	The whole box material is SUS304 senior stainless steel plate
Temperature control mode	PID self-adjusting temperature control mode
Power Supply	220V±10%, single-phase three-wire system, 50/60Hz

Other supplier products

	Abrasive Wear Test Apparatus	Standard ASTM G65 - 04 GB/T 3960-1983 Main Purposes The wet - type rubber wheel abrasive wear testing machine is primarily employed to assess t...
	Safety shoe impact meter	According to the criteria Bs-953.1870 EN-344. ANSI-Z41 CSA-Z195 ISO K88782 EN ISO 20344. ANSI-Z41 BS EN-344 CSA-ZI95 LD50-1994 AS/NZS 22...
	Intramedullary Nails Four - point Bending Fatigue Tester	Standard YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intramedullary nails and locking screws, including load appl...
	Electrode tortuosity tester & diaphragm ion conductivity tester	The Electrode Tortuosity Tester and Diaphragm Ion Conductivity Tester are precision systems designed for advanced analysis of battery electrodes an...
	Flip Phone Durability Tester	Standards: GB/T2423.2-2008IEC60068-2-1IEC60068-2-2JEDECJESD22-B111AASTMF1977 Product Advantages: Specifically designed for highly accurate and r...

供应产品

Same products

	Gas Oxidizing Property Tester	卖方: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	卖方: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	卖方: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	卖方: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	卖方: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...