Diaper Anti-Side Leakage Performance Tester
The Diaper Anti-Side Leakage Performance Tester is designed to accurately measure the liquid loss of nonwoven materials and evaluate the anti-side leakage performance of diapers. It is widely used in the research and development, quality control, and performance testing of baby diapers, adult diapers, sanitary napkins, and other absorbent hygiene products. This instrument provides reliable, quantitative data to guide material design, production optimization, and product performance improvements.
Application
(1) Baby diapers, training pants, and pull-up diapers
(2) Adult incontinence diapers and absorbent briefs
(3) Sanitary napkins, panty liners, and menstrual products
(4) Absorbent underpads, bed pads, and protective sheets
(5) Nonwoven materials, superabsorbent polymers (SAP), and top sheet materials
(6) Liquid barrier and acquisition layers in diaper prototypes
(7) Laboratory testing of raw materials and finished products
(8) Production line quality control and pre-shipment inspection
Standards
The instrument is designed to meet multiple national and international standards, including:
(1) GB/T 28004.1-2021 — Diapers Part 1: Baby Diapers
(2) GB/T 28004.2-2021 — Disposable Diapers Part 2: Adult Diapers
(3) EDANA 152.0-99 — Absorbency Test Method for Nonwoven Materials
(4) ISO 9073-11 — Textiles — Test Method for Liquid Loss in Nonwovens
(5) ASTM F1911 — Standard Test Method for Absorbency of Disposable Hygiene Products
(6) JIS L 1096 — Testing Methods for Disposable Absorbent Products
Features
(1) Measures key liquid retention and leakage properties for accurate performance evaluation.
(2) Adjustable pressure and timing controls to simulate real usage conditions.
(3) Suitable for various product types, including baby and adult diapers, sanitary napkins, and absorbent pads.
(4) High-precision measurement ensures repeatable and reliable results.
(5) User-friendly interface for easy operation and monitoring.
Parameters
| Parameter | Specification |
|---|---|
| Test range | 0–500 ml (depending on instrument model) |
| Measurement accuracy | ±0.5 ml |
| Sample diameter | 40 mm |
| Test area | 20 cm² |
| Pressure range | 0–200 kPa (or higher) |
| Time control | 0–999 s |
| Power supply | AC 220V, 50/60 Hz |
| Overall dimensions | Dependent on model |
| Weight | Dependent on model |
Accessories
(1) Main unit ×1
(2) Sample holders ×2
(3) Instruction manual ×1
(4) Power cable ×1
(5) Calibration weights or pads (if applicable)
Test Procedures
(1) Prepare the sample and place it in the designated holder.
(2) Adjust the test pressure and set the required test time.
(3) Pour the standard test liquid onto the sample.
(4) Start the test and allow the instrument to measure liquid loss and side leakage.
(5) After the test, record the measurement data.
(6) Clean the sample holder and instrument surface before the next test.
Maintenance Information
(1) Regularly clean the sample holder, test platform, and liquid channels to prevent residue buildup.
(2) Check electrical connections and ensure proper grounding before operation.
(3) Calibrate the instrument periodically to maintain measurement accuracy.
(4) Avoid exposure to corrosive liquids or extreme environmental conditions.
(5) Replace worn or damaged parts promptly according to the manufacturer’s instructions.
在线联系供应商
Other supplier products
 |
Rupture strength tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 61730: Safety Standard for Photovoltaic M... |
 |
Spinal Internal Fixation Components System Tester | Standard YY/T 0961-2014 (China): Specifies static/fatigue testing protocols for spinal fixation systems, including connection integrity and anti-l... |
 |
GAS Combustion Rate Tester,ISO817,Testing Machine | Introduction The combustible gas combustion rate tester is developed in accordance with the requirements of UL9540A and accordingtothestandardofAp... |
 |
Syringe piston thrust test device | Product introduction The syringe piston thrust tester is a kind of high precision and high stability measuring equipment, which is used to measure... |
 |
Micro Controll Constant-Speed Friction Plate Tester | A friction and wear testing machine is a device composed of a test force loading system, a friction force measuring system, an experimental clampin... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
