Mask respiratory resistance tester
The Mask Respiratory Resistance Tester is designed to measure the inhalation and exhalation resistance of respirators and masks under controlled conditions. The instrument simulates real human breathing through a 3D-printed standard head mold and accurately measures flow resistance at specified airflow rates. It provides precise evaluation of mask performance, including ordinary masks, dust masks, medical masks, and anti-fog respirators, and is suitable for both manufacturers and national inspection agencies.
Application
The Mask Respiratory Resistance Tester is applicable to respiratory resistance evaluation across the following industries and products:
(1) Medical and Healthcare Industry: surgical masks, medical face masks, N95/FFP masks, disposable masks — testing inhalation and exhalation resistance
(2) Personal Protective Equipment Industry: dust masks, anti-fog masks, respirators — evaluation of airflow resistance and wearer comfort
(3) Quality Control: production batch verification, mask material compliance testing for breathing resistance standards
(4) Research and Development: development of new mask and respirator materials, optimization of airflow and comfort
(5) Third-Party Testing Laboratories: certification testing, laboratory evaluation of mask respiratory resistance
The instrument is widely used for product development, production quality control, R&D, and laboratory testing.
Standards
The instrument complies with and can be applied to the following standards (including but not limited to):
(1) EN 149-2009, Sections 7.15 & 8.3.4 – Respiratory Protective Devices — Testing of Breathing Resistance
(2) EN 13274-3 – Respiratory Protective Devices — Determination of Breathing Resistance
(3) GB 19083 – Technical Requirements for Medical Protective Masks
(4) GB 2626 – Respiratory Protective Equipment: Filtered Particulate Respirator
(5) NIOSH 42 CFR Part 84 – Certification Requirements for Respiratory Protective Devices
(6) JIS/T 8151 – Testing Methods for Respiratory Protective Devices
Features
(1) Touch screen control with English menu and man-machine dialogue mode, easy to operate
(2) Built-in thermal printer for immediate on-site test results
(3) Configurable breath detection and inhalation detection modes
(4) Automatic respirator pipeline switching prevents accidental disconnection or misconnection
(5) 3D-printed standard head mold simulates real human inhalation and exhalation for accurate data
(6) High-precision thermal mass flow sensors with no temperature or pressure compensation required
(7) Micro-manometer sensor with high accuracy (-1000 Pa to 1000 Pa) and adjustable damping
(8) Integrated gas path conversion for rapid switching between inhalation and exhalation pipelines
(9) Data logger with graphic dot-matrix LCD (128 × 64) and 4M memory
(10) Stable suction volume (40–100 L/min) and constant ventilation (85 L/min)
Technical Parameters
| Item | Specification |
|---|---|
| Inhalation Flow Rate | 30 L/min, 95 L/min |
| Exhalation Flow Rate | 160 L/min |
| Flow Impact Test Rate | 300 L/min |
| Flow Sensor | Thermal mass flow meter, high sensitivity |
| Micromanometer Range | -1000 Pa – 1000 Pa, accuracy 1 Pa |
| Head Mold | 3D-printed standard head, simulates human inhalation/exhalation |
| Suction Pump | 40–100 L/min |
| Ventilation Volume | Constant 85 L/min |
| Data Logger | Graphic dot-matrix LCD, 4M memory, Chinese/English interface |
| Power Supply | AC 220 V, 50 Hz |
Accessories
Main testing unit with suction and ventilation system
3D-printed standard head mold
Inhalation and exhalation tubing systems
Thermal mass flow sensor and micromanometer sensor
Built-in thermal printer
Data logger and controller
Power cable
Operation manual
Calibration certificate
Test Procedures
(1) Connect the mask to the inhalation/exhalation pipelines of the standard head mold
(2) Set the airflow rate according to the required test protocol
(3) Start the instrument and begin automatic measurement
(4) Record inhalation and exhalation resistance values
(5) Repeat tests for multiple specimens or different flow conditions
(6) Use the built-in printer or data logger to save results
(7) Clean the head mold, tubing, and sensors after testing
Maintenance Information
(1) Do not carry the instrument by the bottom of the control box to avoid damage
(2) Wipe electroplated parts with oil to prevent rust
(3) After testing, clean the instrument and lubricate moving parts to maintain sensitivity
(4) Wipe control panels and display screens with a dry cloth to protect electronics
(5) Store all fixtures and joint accessories properly, applying anti-rust oil if necessary
在线联系供应商
Other supplier products
 |
Vehicle Cabin Air Filter Tester | The Vehicle Cabin Air Filter Tester is a precision instrument designed to evaluate the filtration performance of passenger compartment air filters ... |
 |
Precision Fiber Slicer | introduction G214Precision Fiber Slicer is used to make the accurate fiber cross-sectional specimens for further inspection or research under the ... |
 |
Carpet hair removal measurement device | Standard ASTM D5417(Standard Test Method for Quantifying Loss of Fiber from Carpets) ISO 10362(Textile Floor Coverings - Determination of Fiber... |
 |
Digital Sock Stretch Tester丨Digital Sock Stretch chamber | |
 |
Sliding Bearing Fatigue Test device | Standards ASTM D2596 / ASTM D2783 / IP 239 EP, DIN 51350 / 1-5. ISO / CD 11008. VW 1444. VW 1454 Material Research and Development During the re... |
Same products
 |
Gas Oxidizing Property Tester | 卖方: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | 卖方: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | 卖方: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | 卖方: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
