Hydrogen Sulfide Corrosion Test Chamber
The Hydrogen Sulfide Corrosion Test Chamber is a precision environmental testing instrument designed to evaluate the corrosion resistance of metals, coatings, and chemical-treated surfaces under controlled hydrogen sulfide (H₂S) gas conditions. It provides accurate control of temperature, humidity, and H₂S concentration, allowing simulation of corrosive environments to assess material durability, color change, and coating performance.
Application
(1) Testing corrosion resistance of metal and non-metal coatings.
(2) Evaluating color change resistance of metal plating and chemical treatment layers.
(3) Assessing durability of electrical products and components exposed to H₂S gas.
(4) Material quality control in automotive, aerospace, and industrial manufacturing.
(5) Research and development of protective coatings and corrosion-resistant materials.
(6) Certification and compliance testing for domestic and international standards.
(7) Laboratory evaluation of alloys, steels, copper, zinc, nickel, and painted or plated surfaces.
Standards
(1) GB/T 978.9-88 – Corrosion Test of Metal and Non-Metal Coatings Under Condensing Sulfur Dioxide.
(2) ISO 6988 – Corrosion Tests in Artificial Atmospheres – Sulfur Dioxide Tests.
(3) QB/T 3831 – Color Change Resistance Test for Metal Plating and Chemical Treatment Layers.
(4) GB 2423.20-81 – Hydrogen Sulfide Test for Electrical Products.
(5) Additional international and national standards for gas corrosion, environmental simulation, and accelerated aging tests.
Features
(1) High-precision PID microcomputer controller with 0.1°C resolution.
(2) Stable temperature control: ±0.5°C or ±2°C depending on model.
(3) Bottled gas supply system with precise H₂S concentration regulation (0.1–1% v/v).
(4) Humidity control: 93–98% RH with ±2% deviation.
(5) Titanium alloy nickel-chromium heating system with PID+SRR synchronization.
(6) Safety protections including leak detection, short-circuit protection, and over-temperature protection.
(7) Equipped with 6 V-shaped corrosion-resistant racks and 12 O-shaped test rods.
(8) Robust rotary table system allowing simultaneous testing of multiple samples.
Technical Parameters
| Model | Inner Chamber Size (W×D×H) | Outer Dimensions (L×W×H) | Power Consumption (kW) | Temperature Range | Humidity Range | Gas Concentration |
|---|---|---|---|---|---|---|
| H2S-150 | 450×600×450 mm | 680×1000×1050 mm | 1.1 | 25–40°C | 93–98% RH | 25±5 ppm |
| H2S-250 | 600×900×500 mm | 850×1420×1120 mm | 1.2 | 25–40°C | 93–98% RH | 25±5 ppm |
| H2S-750 | 750×1100×500 mm | 1000×1650×1320 mm | 2.1 | 25–40°C | 93–98% RH | 25±5 ppm |
| H2S-010 | 850×1300×550 mm | 1150×1900×1370 mm | 2.2 | 25–40°C | 93–98% RH | 25±5 ppm |
Accessories
(1) Gas regulators and safety valves.
(2) Sample holders: 6 V-shaped racks, 12 O-shaped test rods.
(3) Power cable and grounding cable.
(4) User manual and product qualification certificate.
(5) Optional data logging and timer extension modules.
Test Procedures
(1) Place test samples onto V-shaped racks or O-shaped rods.
(2) Insert the sample holders into the rotary table and secure the chamber.
(3) Set target temperature, humidity, and H₂S concentration on the controller.
(4) Activate fan rotation for uniform gas distribution across all samples.
(5) Run the test for the designated duration according to the selected standard.
(6) Record weight changes, color change, or corrosion effects after exposure.
(7) Repeat testing for multiple cycles or comparative studies as needed.
Maintenance Information
(1) Regularly inspect gas supply system and valves for leaks.
(2) Calibrate temperature and humidity sensors periodically.
(3) Clean chamber interior and sample holders to prevent residue build-up.
(4) Verify fan operation and rotary mechanism to ensure uniform gas distribution.
(5) Store the instrument in a dry environment and avoid direct sunlight exposure.
(6) Check electrical components, PID controller, and safety interlocks before each use.
在线联系供应商
Other supplier products
 |
Rapid screening Calorimeter | The rapid - screening calorimeter is a professional calorimetric instrument for the quick assessment of reaction thermal hazards. It supports multi... |
 |
Protective Clothing Synthetic Blood Penetration Tester | Introduction It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test press... |
 |
Fully Automatic Continuous Flow Reaction Calorimeter | This product is a highly automated and customizable continuous flow reaction thermal analysis and calorimetry platform. It features automatic sampl... |
 |
Rubber hose outer coating wear testing machine | The Rubber Hose Outer Coating Wear Testing Machine is a precision laboratory and production testing instrument designed to evaluate the abrasion re... |
 |
Helmet Webbing Micro - displacement Abrasion Tester | Main Purposes It is used to detect the abrasion condition of the webbing, the micro - displacement performance of the webbing, and the fatigue lif... |
Same products
 |
Gas Oxidizing Property Tester | 卖方: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | 卖方: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | 卖方: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | 卖方: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
