Safety Helmets Wearing Stability Tester
The Safety Helmets Wearing Stability Tester is designed to evaluate helmet retention and fit under dynamic conditions, simulating real-world head movements and impact scenarios. It provides precise measurement of helmet stability, retention forces, and deformation, ensuring compliance with international and national safety standards. The instrument is suitable for production quality control, R&D, and certification testing of industrial, sports, and cycling helmets.
Application
This tester is suitable for assessing helmet fit stability and retention performance for:
(1) Industrial helmets used in construction, manufacturing, and mining
(2) Cycling helmets for road, mountain, and urban riding
(3) Sports helmets for skating, climbing, skiing, and other high-mobility activities
(4) Motorcycle and E-bike helmets for rider safety certification
(5) R&D of custom helmet designs with adjustable retention systems
Standards
The tester complies with the following standards:
(1) GB 811-2022 – Safety Helmets: General Technical Requirements
(2) GB 24429-2009 – Sports Helmets: Requirements and Test Methods
(3) GB/T 2812 – Safety Helmets: Test Methods
(4) ISO 6220-2 – Industrial Safety Helmets: Fit Stability
(5) CE Certification (Conformité Européenne)
Features
Multi-Standard Compliance: Simulates extreme lateral forces and evaluates retention system integrity.
High-Precision Measurement: 0.1kg load resolution and 0.1N force sensor accuracy for repeatable results.
Dynamic Tilt Testing: 360° tilt mechanism reproduces real-world head movements.
User-Friendly Operation: 7” touchscreen HMI with preloaded GB/T 2812 sequences and real-time force graphs.
Quick-Swap Helmet Clamp: Rapid replacement of helmets for high-throughput labs.
Safety Systems: Dual interlocks and overload protection prevent accidental activation and sensor damage.
Self-Calibrating System: Auto-tare and linearity checks before each test.
Durable Construction: Aircraft-grade aluminum frame and corrosion-resistant sensors ensure long-term reliability.
Parameters
| Parameter | Specification |
|---|---|
| Impact Weight | 10.0kg ±0.1kg (stainless steel) |
| Initial Load | 3.0kg ±0.1kg (adjustable) |
| Release Method | Manual lever with safety interlock |
| Tilt Range | 0–360° (1° resolution) |
| Force Sensor | 0–500N range, 0.1N resolution |
| Data Acquisition | 16-bit resolution, 1,000Hz sampling |
| Power Supply | 220V AC, 50/60Hz (single-phase) |
| Dimensions | 800mm (W) × 600mm (D) × 1,500mm (H) |
| Weight | 150 kg (net) |
Accessories
(1) Testing Kit: 2x universal helmet clamps (adjustable for 50–65 cm heads), 5x calibration grade load cells (10N–500N)
(2) Software Suite: License key for StabilityTest Pro (Windows/macOS), 1-year free access to cloud-based fit analysis tools
(3) Calibration & Safety: NIST-traceable force gauge, 2x safety glasses (EN 166 rated), 1x face shield
(4) Maintenance Kit: Spare accelerometers and load cells, machine cleaning solution (non-corrosive)
(5) Documentation: Multilingual quick-start guide (printed + digital), compliance certificates for GB/ISO standards
Test Procedures
Secure the helmet in the universal clamp and adjust to the correct head circumference.
Select the wearing stability test mode via the touchscreen HMI.
Set impact weight and initial load according to test requirements.
Adjust tilt angle and initiate the motorized tilt stage.
Monitor real-time force graphs and retention performance during rotation.
Export data as PDF or CSV for certification or R&D analysis.
Repeat tests for additional helmets as required.
Maintenance Information
Inspect helmet clamps, tilt mechanism, and load cells regularly; replace worn parts.
Verify calibration of force sensors every six months using NIST-traceable instruments.
Clean frame, clamps, and sensors with non-corrosive solutions to maintain accuracy.
Store the tester in a dry, temperature-controlled environment to prevent corrosion.
Follow standard electrical safety procedures during operation and maintenance.
在线联系供应商
Other supplier products
 |
Metal Corrosivity Tester | The Metal Corrosivity Tester is used to determine the corrosivity of liquids and solids that may become liquid during transport. It conforms to the... |
 |
Helmets Designated Protection Areas Tester | Main Purposes 1. Used to mark test points and test lines on helmets. 2. Used for line - marking according to different test standards. 3. Used t... |
 |
Goggles Puncture Resistance Testing Machine | Applicable standards: GB 811-2010 ECE R22.05 EN1077 Purpose It is to make a certain weight of sharp objects fall from the height specified i... |
 |
Conditioning Chamber | Features and Benefits 1.The compressor, condenser and other power components are separated from theworkroom, reducing the equipment footprint. 2.... |
 |
Qinsun SUNTEST XXL+ | Qinsun SUNTEST XXL+is a large xenon lamp weathering and photoaging tester that complies with various ISO, ASTM, and ICH industry standards. The exp... |
Same products
 |
Falling Sand Abrasion Test machine | 卖方: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | 卖方: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | 卖方: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | 卖方: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | 卖方: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
