艾派克液压联合冲剪机AIW-90

APEC BrandAIW seriesIronworker features multiple functions, including: punching all kinds of holes (round hole, square hole, oblong hole), louver punching, steel plate punching, flat bar punching, angle steel punching, C-channel punching, H-beam punching, I-beam punching, profile steel shearing (channel shearing, I-beam shearing, round/square bar shearing, flat bar shearing, T-bar shearing, steel plate shearing, angle steel shearing), notching, press brake, angle steel notching , bending, pipe notching. It comes standard with: quick-change coupling nut & sleeve, squaring arm with scale, electronic back gauge, gauging table with stops, punching base table, safety guards and more.We can design any special tools according to your metal fabricating requirements.

APEC Brand AIW-S seriesis improved machine on the base of standard AIW series. It goes along with automatic holding system and temperature cooling system.

Automatic Holding System: There is automatic holding system in angle steel shearing and plate shearing work position. The holders will fix the position of work-piece, in this way, the accuracy is better and more safety for workers meanwhile save time and Improve working efficiency.Temperature cooling system:Once start the machine,the cooling system starts working automatically.The hydraulic oil temperature always stays at 60 degree or less.It is applicable and safety for processing in quantities and long time.

Features

2. b. Valve: Yuken, Japanc. Pump: Atos, Italyd. Oil Seals: NOK, Japane. Timer Relay: OMRON, Japanf. Wiring Terminal Block:WEIDMULLER, Germanyg. Motor: Weiteli, China

AIW SERIES Hydraulic Ironworker WithVery good price/performance ratio

VariousAIW SERIES Hydraulic Ironworker capacity from 45T to 400Tto meet your requirement.

AIW Series Hydraulic Ironworkeruse hydraulic transmission. Light weight, low noise, reliable performance.

The operation of hydraulic ironworker is controlled by foot switch.

Technical Parameters:

Technical Parameter
	Item		Unit	Value
1	Hole Punching	Punching Pressure	KN	900
			mm	20
			mm	30
		Depth of Throat	mm	355
			mm	80
		Stroke Times	times/min	8-22
2	Flat-bar Shearing	Angle of Shear	degree	8°
			mm	20
		Flat Bar (W×T)	mm	480x10
				330x20
3	Angle Steel Shearing	90° Shearing of Equal Angle Steel	mm	140x140x12
		45° Shearing of Equal Angle Steel	mm	70x70x10
4	Profile Steel Shearing	Round-bar	mm	50
		Square-bar	mm	45x45
		T-bar	mm	140x70x12
		I-beam	mm	160x86x6
		C-channel	mm
5	Notching	Thickness	mm	13
		Width	mm	57
		Depth	mm	100
6	Material Tensile Strength		N/mm2	450
7	Motor Power		KW
8	Overall Dimensions(L×W×H)		mm	1950x900x1930
9	Gross Weight		Kg	2600

Note:Design and specifications subject to change without notice.

Accessories:

The above punching and moulds will be installed in the machine.

For other dies and blades, customers need to order

Installation & Operation Training

APECwill provide you 1-7 day installation and operating training in our factory.

Training After-sales service

1. All labels on machines and lay-out drawings, Electrical diagram, Operation Manual, will be in English. The seller should send all necessary files to the buyer since the third week since project execution. All documents in hard copies should be also shipped with machines together.
2. a. After all machines are delivered to customer’s factory; Buyer is responsible for all preparation work, e.g. electricity supply, water supply, labors and cranes, etc.b. The buyer will prepare for visa application for their engineers, who are responsible for guide of machine installation and testing at the Buyer’s factory.c. The Buyer will buy the round-trip air ticket for Engineer if visa application is approved. The buyer is also responsible to bear expenses generated, e.g. visa formalities, meals, accommodation and allowance of USD80 per day for each engineer.d. Engineer will give free training lessons to labors in buyer’s factory.
3. a.Quantity/Quality Discrepancy to destination port during transportation:In case of quality/quantity discrepancy to destination port in transportation, the buyer should file claim within 30 days after the arrival of the goods at port of destination. The seller will not be responsible for any discrepancy of the goods caused by shipping company and other transportation organization and/or post office.b.Guarantee period and after-sales services: 13 months since date of bill of ladingDuring this guarantee period, the seller will provide spare parts without any charge in case of quality discrepancy caused by us. If the malfunctions are caused by your incorrect operations, the seller will provide the buyer spare parts at cost price.c.Long-term service:The seller will charge the buyer cost price of spare parts beyond one year and provide long-term technical guide.

FAQS:

T/T, L/C at sightare acceptable by us.

It is up to your requirement. EX-WORS, FOB, CIF, CFR and so on are acceptableby us.

25 working days from our accountant confirm your deposit payment.

We will arrange the machine production from our accountant confirm your deposit payment. The deposit is 30% of the contract.The balance should be paid up before loading machines.

13 months quality guaranty for the main spare parts, not include quick-wears parts,like blade, punch, die and so on.If theparts of machines have problems, whichare caused by its own quality, we will provide theaccessories for free.

Other supplier products

	江苏艾派克机床制造有限公司	APEC Lathe is a professional manufacturer specialized in the design, production and sales of all types of metal processing machine, including mecha...
	艾派克液压联合冲剪机 AIW-120	APEC Brand AIW series Ironworker features multiple functions, including: punching all kinds of holes (round hole, square hole, oblong hole), louver...
	艾派克液压联合冲剪机AIW-60	APEC BrandAIW seriesIronworker features multiple functions, including: punching all kinds of holes (round hole, square hole, oblong hole), louver p...
	艾派克液压联合冲剪机AIW-90	APEC BrandAIW seriesIronworker features multiple functions, including: punching all kinds of holes (round hole, square hole, oblong hole), louver p...

供应产品

Same products

	OEM China Diamond Grinding Shoe Suppliers and Manufacturers	卖方: Xiamen ChinShine Industry and Trade Corporation	Diamond grinding shoes are essential tools in the construction and flooring industries, offerin...
	C-Frame Punching Machine for Sheet Metal Stamping Industry	卖方: Ningbo Goanwin Machinery Manufacturing Co., Ltd.	C-Frame Punching Machine for Sheet Metal Stamping Industry1.Application:Applicable to light, thin...
	镁锭/镁合金锭抛光机	卖方: 濮阳市名利石化机械设备制造有限公司	镁锭抛光机/镁合金锭抛光机 它可以去除镁锭/镁合金锭的杂质、缺陷，使其表面光滑平整。
	铝锭切屑机	卖方: 濮阳市名利石化机械设备制造有限公司	我们有铝锭切屑机和铝锭制粒制粉生产线。该生产线由铝锭切屑机、造粒机（制粒机/磨机）组成。切屑机将铝锭切成屑，造粒机将屑磨成颗粒或粉末。您可以根据需要购买设备或生产线。
	MTL5582B MTL Intrinsically Safe Isolator 5500 Series RTD-RTD Isolator	卖方: 840499	MTL 5500 Intrinsically Safe Isolators Resistance Isolator MTL5582B MTL4582B - MTL5582B RESISTANC...