JMZ-1-3.0A Rubber & Metal Anti Vibration Isolator Mounts

With the rapid development of modern industrial engineering, the various manufacturing machine, transportation machine are all developing to high speed, high efficiency, high precision, and automation. However, with the increase of equipment's power and speed, the intensity of the vibration source in engineering practice is increasing constantly, the harm is also obvious because of vibration and noise. Vibration does the great harm to operators, precision instruments, machinery equipment and architectural structure, at the same time, vibration and the noise is also bad for people's living condition and physical and mental health. Therefore, harm from vibration and noise is drawing more and more attention from researchers from various countries.

JMZ-1-3.0A rubber isolation mounting feetbelongs to the JMZ-1 series. It adopts the structure of double spring and special friction plate. It has good impact resistance and a 3kg maximum rated load. It can vibrate isolation in any direction. This type of rubber isolation mounting feet has a wide operating frequency range and can be used in harsh environments such as high and low temperature and chemical pollution. It has good performances such as anti-humidity, anti-salt fog, high and low-temperature resistance, mold resistance and long service life.

Vibration and noise are harmful in most cases, vibration hazards are regarded as one of the seven environmental hazards. The hazards of vibration and noise can be divided into the following aspects:

When vibration is over certain strength, it will do harm to human bodies. People will have insomnia, lumbago, backache, fatigue, impotence, headache, dizzy, drowsy, gastro-intestinal, low appetite and weak attention id they are under the environment of large vibration and noise for a long time, it is also easy to make mistakes and technical error, what's worse, it will make people's senses blunt and cause physical illness.

Vibration brings unsafe factors to buildings when vibration is acting on buildings, that is to say, mechanical energy is acting on buildings, it will create deformation. Vibration makes bigger deformation and setting of the ground. When vibration frequency and building structure frequency is the same or similar, the harm will be more serious, it even makes buildings fall down. Vibration will cause uneven sedimentation and damage plant and equipment if the basic geological condition of equipment is bad.

At present, machinery equipment and power is larger and larger and its variety is more and more diversified, after the vibration from machinery equipment is transferred to basics, floors, walls and other structure, vibration will transfer to other room by elastic waves and create vibration between neighboring air, so the vibration of objects will be spread to everywhere in the form of sound wave, that is what we called noise. Ferroconcrete and metal are the good material for isolating air noise, but it makes no differences for solid state noise, sometimes a pump can break the peace of the whole building.

Vibration breaks the accuracy, reliability and sensitivity. If the instruments and apparatus are near the strong vibration source, vibration will have the different influence on them. Influence on the normal operation of instruments and influence on the accuracy of the scale of apparatus reduces the precision of measurement, what's worse, it will make instruments out of order, especially for electric instruments.

Therefore, how to decrease the harm of vibration and noise efficiently is a very important issue for the industrial development all over the world, vibration control is the most direct way to decrease the harm of vibration and noise in engineering practice, so the research of vibration control is necessary for controlling vibration and noise.

Other supplier products

	JGX-1598 Wire Rope Vibrationsisolator/Shock Isolator For Multi Application	Vibrationsisolatorer Wire rope isolators are also called wire rope anti vibration mounts, which are used to control vibration produced by motors f...
	Wire Rope Isolator	Wire rope vibration isolator was developed successfully by America in the 1970s, it is a typical nonlinear , its damping force characteristics have...
	GRY-10A Stainless Steel Camera Vibration Isolator for UAV/Camera/Gimbal Shock Absorption	The GRY-10A marine shipbuilding vibration mount is made by the 30 loops 1.5mm diameter wire rope winded in the two mounting bars. The max static lo...
	Difference between the Stainless Steel Splint and the Aluminum Splint of Wire Rope Shock Absorber	Difference between the Stainless Steel Splintand the Aluminum Splint of Wire Rope Shock Absorber Wire rope isolator mounts has been widely used in...
	Wire Rope Isolators	Xi'an Hoan Microwave Co. Ltd.,, headquartered in China, Xi’an city, was founded in 2005, is a premier supplier of Industry Energy Absorption ...

供应产品

Same products

	Rail Welder A Frame aligners railway welding tools	卖方: 834406	产品描述 A型车架 A-Frame 是一种导轨对准器，可精确对准要焊接的导轨。该设备在焊接操作期间将导轨固定到位。
	2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system	卖方: 824681	What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm...
	Horizontal Machining Center	卖方: Xilong (Shanghai) Machine Tool Co., Ltd.	Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ...
	Horizontal Lathe	卖方: Xilong (Shanghai) Machine Tool Co., Ltd.	As a professional horizontal lathe manufacturerand horizontal lathe factory, Sealion Machine Tool...
	Gantry Machining Center	卖方: Xilong (Shanghai) Machine Tool Co., Ltd.	SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry ty...