CNC Gantry Milling Machine China

XK2308CNC Gantry Milling Machine

CNC Gantry Milling Machine China,

The main performance characteristics：

1 the spindle of the CNC Gantry Machining Centeradopts the high precision spindle assembly, the belt type milling head, the main shaft is the servo motor drive. X, y, Z axis servo control, the direct connect architecture, with automatic lubricating system, machine tools to achieve a rapid motion; X, y, Z three directions to feed with high accuracy high strength ball screw, high feed speed; driving motor through flexible coupling with screw direct coupled, servo servo motor directly deliver power to the high precision ball screw, no backlash to ensure the positioning precision of the machine tool.

2 Taiwan famous brand spindle with high speed and high precision, high rigidity spindle unit, axial and radial load capacity, speed up to 6000rpm; the center of spindle blowing structure, with rapidly in the tool release after cleaning of the spindle cone center of high pressure gas, to ensure the accuracy of tool clamping;

4 Y, X, Z three direction guide rails, the lead screw all uses the airtight protection, guarantees the lead screw and the guide rail clean, guarantees the machine tool transmission and the movement precision;

5 the outer protection of the machine tool is designed with the ring structure, which is safe and reliable;

7 using the centralized automatic lubrication device, timing, quantitative automatic intermittent lubrication, stable and reliable work;

8 the machine electrical system wiring neatly, the structure is reasonable, the electric box seal is good, is equipped with the heat exchange system, guaranteed the good use environment;

10 the machine is easy to operate, flexible and quick.

More information you can views here

Application：

This machine is used in CNC milling, boring, drilling, tapping, processing of steel, cast steel, cast iron etc.. Machine tool accessory head to realize the of all kinds of plate, plate, shell and mould for complex parts in a fixture in complete drilling, milling, boring, reaming, reaming, tapping a variety of processes. It can be used for small batch spare parts, processing and manufacturing, of complex, high precision parts processing more show its superiority, also can compose the automatic production line for mass production, to ensure the parts of product quality and efficient production.

Product main technical parameters:

Specifications	Units	XK2308
Table size	mm	800x1600
	kg	3000
Gantry width	mm	1200
Table travel（X.Y.Z）	mm	1320x320
T-type slot numbers / width /space	mm	5-22x140
The moving direction of travel of working table	mm	1750
The sliding seat moving direction of travel	mm	1200
Spindle up and down movement direction travel	mm	500
Distance from spindle end to platform	mm	110-610
Spindle specification (model / installation diameter)	mm	BT50-φ155
Spindle speed	r/min	6000
Fast moving X.Y axis	mm/min	10000
Fast moving Z axis	mm/min	5000
Feed speed (X.Y.Z)	mm/min	5-5000

Other supplier products

	vertical CNC lathe	CK5112BCNC Vertical Lathe Machine CNC Lathe Machine The lathe features: vertical CNC latheis a advanced equipment of high performance, widely tech...
	CK6163E Heavy Duty CNC Lathe Machine	CK6163EHeavy Duty CNC Lathe Machine Flat Bed CNC Lathe Machine CNC Lathe Machine Product main features and uses： This machine can undertake a varie...
	Heavy Duty CNC Lathe Machine	CK6163EHeavy Duty CNC Lathe Machine Flat Bed CNC Lathe Machine CNC Lathe Machine Product main features and uses： This Heavy Duty CNC Lathe Machinec...
	CK6140V CNC Lathe Machine	CK6140V CNC Lathe Machine Flat Bed CNC Lathe Machine CNC Horizontal Lathe Factory China Features： Four position electric turret Frequency conversio...
	CW6163E Heavy Duty Lathe Machine	CW6163EHeavy Duty Lathe Machine Lathe Machine Product main features and uses： This machine can undertake a variety of turning work piece, it can tu...

供应产品

Same products

	The Ultimate Tool for Bubble-Free Displays	卖方: 深圳市维客修科技有限公司	FORWARD FW-16R除泡机、FW-8R迷你除泡机，在手机、iPhone、iPad、平板屏幕翻新过程中，去除屏幕OCA气泡，最大支持12.9寸屏幕。安全门设计，24V低压风阀配置，有效降低...
	Precision CNC Lathe With Conjoined Oblique Rail Cutter Tower	卖方: Zhejiang Guoyu CNC Machine Tool Co., Ltd.	Technical Characteristics: 45° slant bed base structure, with strict aging treatment, smooth ...
	Rail Welder A Frame aligners railway welding tools	卖方: 834406	产品描述 A型车架 A-Frame 是一种导轨对准器，可精确对准要焊接的导轨。该设备在焊接操作期间将导轨固定到位。
	2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system	卖方: 824681	What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm...
	Horizontal Machining Center	卖方: Xilong (Shanghai) Machine Tool Co., Ltd.	Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ...