C140 Light Steel Frame Roll Forming Machine

The can produce all frames of building construction.

SURFACE TREATMENT

A: Applicable Material

1) Processing material: Q345、G550 galvanized steel strip

2) Material thickness: 0.75-1.2mm

3) Material width: 234mm

B: Formed profiles

1) Profile sizes: width 140mm; web 41mm; lip 10-12mm

2) Length: the max 8000mm

3) Length accuracy: ±0.5mm

4) Forming speed: the max speed 35m/min, normally 2-3 tons per day

C: Electric Decoiler

1) Coil OD: Ф1400 mm (the max)

2) Coil ID: Ф508±10 mm

3) The max width: 300mm

4) Coil weight: ≤3000 kg

5) Expending or shrinking method: operate the handle to more the four connection rods to away from or close up to the cored shaft

6) Brake: cored shaft is double hold tightly

7) Driving method: decoil raw material automatically

D: Punching system

1) Punching mould material: Cr12MOV1

2) Multi-purpose punching devices:

Punching device 1 for web notch and lip notch, blanking force 40KN

Punching device 2 for notch, blanking force 30KN

Punching device 3 for dimple, blanking force 10KN

Punching device 4 for service hole, blanking force 10KN

Punching device 5 for lipcut, blanking force 30KN

Punching device 6 for truss notch, blanking force 40KN

3) Every punching device is unipunch, can be controlled independently

4) Distance of punching holes can be adjustable

5) The life of punching mould: times, 1000000 times for frequently-used mould

E: Roll Forming Parts

1) Feeding device: with four guiding rollers

2) Roll forming device: 12 roller stations, one is to form and adjust the angle ( from 87 to 95) degree of bottom and web

3) Straightening device: with one pair of horizontal shafts and two dangling rollers

4) Profile leading device: with one set of leading rollers

5) Roller material: GCr15

6) Roller processing technic: CNC machining, heat treatment HRC58-60, then processed by CNC lathe, plating finally

7) Shaft material: 40Cr

8) Roller processing technic: CNC machining, quenching and tempering HRC28-32, then processed by CNC lathe, plating and polishing finally

9) Driving method: servo motor

10) Weight: about 3500kg

F: Cutting System

1) Cutter material: Cr12MOV1.

2) Cutting device: 3 pieces of blades to keep and cut the shape of profile

3) Cutting type: fully automatic cut to any length

G: Production receiving System

1) Receiving table length: 4m

2) Receiving method: receive formed profiles and side-slip them pneumatically to saving table

H: Control System

1) Main control system: One Lenovo laptop and a control box inside of based frames of the machine

2) Producing software: self-developed PLC computer control system with inveter

3) Designing software: Vertext BD type

4) Leaser Printing Device: USA Matthews Leaser Printing Device for painting spray logo and installation indicating number

5) Remote-control device: ireless remote-controller controls machine to go forward or backward or stop

6) Brands of main components: PLC（self-developed), Relay (French Schneider), proximity switch（French Schneider), Encoder（Japanese Omron）, Servo Motor (Xinjie) All those components takes with International Warranty Service

I: Servo System and Hydraulic System

1) Servo motor: 5.5kw, taking with precision planetary gear reducer

2) Hydraulic Station: 7.5kw, hydraulic oil injection 200 litre

3) Brands of main components: solenoid valve (Germanic Rexroth)

4) Power supply: 380V, 3 Phase, 50Hz(or as per your request)

J: Attached Components and Spare Parts

1) 2 sets of punching poles and down moulds, one set of tools

2) Protective cover: totally-enclosed type

3) Manual operation

Software VERTEX BD Pro

VERTEX BUILDING DESIGN SOFTWARE SOLUTION

A: The standard package contains:

1) Architectural Design:

Full architectural drawings

3D browser with furniture & accessories

Tools for creating presentable models

(e.g. Fascia, Soffits, Window & Door Trims, Guttering…)

2) 3D Modeling and 2D Drafting

3) DWG, DXF, 3DS, IGES and SAT -interfaces

4) Archiving tools

5) OpenGL-rendering

6) Material database

7) Wall, Floor and Roof panels and roof trusses:

Automatic panel drawings

Automatic truss structure drawings

Automatic joist & rafter layout drawings

8) Bill of materials, Cutting lists

9) First year support and maintenance

10) Add-On modules:

Vertex Standard CSV NC interface

Vertex Truss Design module, (AS/NZS Standards)

B: Software maintenance

The software maintenance agreement includes a hotline support service, a named support person and new software versions. Thus, new features that improve efficiency and ease-of-use are immediately at the disposal of the customer.

First year software support and maintenance is included to software license purchase.

1) 1 day Vertex BD basics and architectural o Drafting

Projects with Vertex BD o Wall design

Floor design o Roof design o Profiles

Drawings

2) 2 days framing training

How to use architectural model

Wall panel design

Roof and floor framing and trusses

Panel drawings

3) Training will be On-Site at customer's premises or at Vertex office in Cleveland, QLD Australia

4) Maximum five (5) people can attend to training

5) Travel expenses will be charged separately

6) Training will be charged in advance

D: Recommendation for Hardware

1) The advised minimum PC configuration for VERTEX use is:

2) PC with Windows 7, Windows 8, Windows 8.1 or Windows 10

3) Pentium IV or AMD Athlon dual-core, 2 GHz,

4) 8 GB RAM

5) 120.0 GB disc

6) Display at 1280x1024 resolution

7) Graphics card with full Open GL support and min 512 Mb memory.

E: Integrated Graphics Cards are not recommended

1) CD/DVD Drive

2) 3 – button mouse

3) Backup system

TECHNOLOGY

Electric Decoiler→Multi-Purpose Punching System→Main Roll Forming Machine→Leaser Printing System→Punching System→Automatic Cutting System→Auto Receiving Table, Servo Motors, Control System with Software, Hydraulic System

Other supplier products

	Roller Shutter Roll Forming Machine	1. SURFACE TREATMENTof 1) Processing material: steel strip 2) Material thickness: 0.45mm-1.0mm 3) Formed sizes on the machine: as per profil...
	2-Wave Highway Guardrail Roll Forming Machine	We also can design the as per your required profile drawing SURFACE TREATMENT 1) Processing material: steel strip 2) Material thickness: 2.5mm...
	EPS&Rock Wool Insulated Sandwich Panel Production Line	We also can design the as per your required profile drawing SPECIFICATIONS Composite De-coiler(4 sets)—Roll Forming Machine --laminating sy...
	Metal Omega Profile Roll Forming Machine	We also can design the machine strictly according to your required profile. SURFACE TREATMENT 1) Processing material: 150mm width steel strip 2) M...
	1.25M-1.0MM Automatic Cutting Machine	SURFACE TREATMENT Raw material: colored steel sheet, galvanized sheet, aluminum sheet, TECHNOLOGY 7-ton hydraulic decoiler&r...

供应产品

Same products

	镁锭/镁合金锭抛光机	卖方: 濮阳市名利石化机械设备制造有限公司	镁锭抛光机/镁合金锭抛光机 它可以去除镁锭/镁合金锭的杂质、缺陷，使其表面光滑平整。
	铝锭切屑机	卖方: 濮阳市名利石化机械设备制造有限公司	我们有铝锭切屑机和铝锭制粒制粉生产线。该生产线由铝锭切屑机、造粒机（制粒机/磨机）组成。切屑机将铝锭切成屑，造粒机将屑磨成颗粒或粉末。您可以根据需要购买设备或生产线。
	MTL5582B MTL Intrinsically Safe Isolator 5500 Series RTD-RTD Isolator	卖方: 840499	MTL 5500 Intrinsically Safe Isolators Resistance Isolator MTL5582B MTL4582B - MTL5582B RESISTANC...
	3015 fiber metal cnc laser cutting business	卖方: 济南威华机械设备有限公司	管道必须由铜或 VA 不锈钢制成，无氧化且清洁，授权的燃气安装人员必须首先根据上述规定确定处理气体的燃气管道尺寸
	3015 fiber metal laser cutter for sale	卖方: 济南威华机械设备有限公司	3015 光纤金属激光切割机出售 3000x1500mm 切割尺寸 切割气体 切割气体消耗量 O2 或 N2 管路和机器连接之间的工艺进料连接器 (O 2 2/N 2 2 ) 必须由客户...