.

PFM1500 Automated vacuum casting system

It adopts Germany imported Rietschle vacuum pump, ultimate vacuum to ensure complete defoaming; the inner tank selects 5mm thick stainless steel plate to effectively prevent rust and easy to clean; specially selects the aviation plug connection line and uses imported sealing glue to effectively guarantee Equipment is airtight.

Using a rapid part or a CNCed model as a master mold, a high-strength silicone mold is produced under vacuum, then to clone the same replica as the prototype. A silicone mold can replicate about 20 products. The processing speed is more than ten times that of CNC, the processing cost is as low as ten or even dozens of times compared with CNC, which greatly improves production efficiency and greatly reduces the development cost, cycle and risk of direct tooling.

The mold size is up to 1500mmX 1200 mm X 1200 mm, which can efficiently realize the copying of large complex workpieces in small batches production, help to examine the appearance and structural performance of the products, and avoid the risk of direct tooling.

The soft molds after solidification molding are all transparent or translucent, have good tensile strength, and are easy to cut and shape.

According to the specific application requirements of the customer, it provides multiple configuration customizations such as vacuum pump configuration, liner material, and operation mode (automatic/manual).

Back profile:

With our automated , you will get free access to equipment usage training, 3D printing prototype production training, post-treatment process solutions, and lifetime technical support to help optimize production and maximize profit.



在线联系供应商

至: DUCH GROUP
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Reverse-Engineered Service
Reverse-Engineered Service What is Reverse Engineering? Reverse engineering is to obtain the point cloud data of the physical model by using the three-dimensional digital sca...
What is 3D Printing Service?
What is 3D Printing Service? 3D printing technology is a collective term for a series of rapid prototyping technologies, the basic principle of which is laminated manufacturing...
ProtoFab SLA450 DLC
ProtoFab SLA450 DLC SLA Stereolithography 3d Printer For Sale - Precision Benchmark True-to-CAD Accuracy and Surface Finish True-to-CAD Accuracy and Surface Finish Fab...
What is Reverse Engineering?
What is Reverse Engineering? reverse engineering chinais to obtain the point cloud data of the physical model by using the three-dimensional digital scanning of the existing ph...
Reverse-Engineered Service
Reverse-Engineered Service What is Reverse Engineering? Reverse engineering Chinais to obtain the point cloud data of the physical model by using the three-dimensional digita...
供应产品

Same products

Semi-Solid Die Casting
Semi-Solid Die Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. Based on the theory of stir cast invented by Mr. D.B. Spencer and M.C.Flemings, the semisolid die...
Sand Casting
Sand Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. Sand casting is the most commonly applied method for casting the metal part. It suits most of the...
Resin Sand Casting
Resin Sand Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. Resin sand castingis a kind of floor molding process, by mixing the resin with quartz sand and so...
Low Pressure Die Casting
Low Pressure Die Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. The low pressure die casting is to let the melted metal flow into the casting mold under a certai...
Lost Wax Investment Casting
Lost Wax Investment Casting 卖方: Shanxi Rayforce Manufacture Co., Ltd. The lost-wax casting process can differ depending on the application and the requirement, but it ...