.

Resin Sand Casting

Resin sand castingis a kind of floor molding process, by mixing the resin with quartz sand and solidification agent, to create the very hard and solid mold. The resulted resin sand casting product will have smooth surfaces, accurate dimensions, and less sand residual and casting defects on the surfaces or inside. During the resin sand casting process, some annexing agents also shall be applied to improve the intensity of resin sand.

Basic Property of Resin Sand Casting Products

dimension tolerance ±0.3mm, CT5~7;

surface finish Ra5;

wall thickness up to 7mm;

unit weight extent 1~40000kg;

unit size limitation 0.03~3.5 meter;

degree of complexity- complex;

machining required- normal;

production lead time- short;

production cost- low.

Advantages Of Resin Sand Casting

Resin sand casting typically produces accurate results that are superior to other sand-casting methods.

This process also results in increased surface strength when compared to other sand-casting options

The nature of resin sand casting can help reduce defects such as sand holes, air holes, and shrinkage.

More flexibility with sizing

Resin sand casting can produce large iron castings. These castings can range from dozens of kilograms up to several tons.

Resin Sand Casting Process

Compared with clay sand, the appearance quality of resin sand castings depends on the quality of the mold, thus resin sand requires a higher quality of the mold. The molding process when making it better adapted to the needs of resin sand molding, mainly in the following aspects:

Machining allowance: The hardened resin sand castings have better stiffness and higher dimensional accuracy and are not easily deformed, so when choosing process parameters, a smaller machining allowance can be selected, thus reducing the consumption of metal solution and the cost of machining, which can improve the dimensional accuracy of the castings.

Mold slope: resin sand in the mold has a certain hardening strength, smaller yielding, larger friction if the use of knocking method to start the mold, easy to damage the mold, while the resin sand poor repairability, start the mold if damaged, more difficult to repair. When using resin sand molding, according to the actual production and product structure should increase the mold drawing slope, can smoothly start the mold, get the quality with the market for castings product appearance quality requirements continue to improve, resin sand castings in the quality of the advantages will be increasingly important, resin sand casting production process, will also be rapid development and popularity.

Surface roughness of the mold: the roughness of the mold surface plays a decisive role in the surface roughness of resin sand castings, thus minimizing the surface roughness of the mold is an important measure to obtain high-quality castings.

Raw Materials of Resin Sand Casting

The correct choice of raw materials is the basis for reducing the cost of resin sand casting. The choice of raw materials has a greater impact on the casting cost. Because the raw material is good or bad, on the one hand, affects the number of various materials added and consumed, on the other hand, affects the quality index of the casting.

Selection of raw sand

The original sand is divided into ordinary sand, washed sand, scrubbed sand, and other types because the mud content in the scrubbed sand has been very little, so it can greatly reduce the waste of resin, should be the first choice, followed by washed sand, but never use the original sand without treatment.

Selection of resin

Resin is more expensive and has a greater impact on the casting cost. If you choose a poor quality resin, not only affects the quality of the sand, resulting in more casting scrap but also increases the amount of resin added, the direct result is to make the casting costs increase.

Selection of other raw materials

Other raw materials include curing agents, paint, binder, release agent, sealing clay bar, etc. The impact of these raw materials on the quality of the casting is not the main, but the impact on the cost of casting should not be ignored, such as the amount of curing agent added to the different, not only due to the impact on the productivity of the molding process and affect production costs, but also affect the cost of materials. Therefore, the selection of other raw materials principle is to consider both its quality, but also to consider its match with the main materials such as procurement, transportation, and other issues.

Rayforce Manufacture is a private foundry supplier, we provide furan sand moulding, resin bonded sand castingand etc. Want to know more? Please contact us.



在线联系供应商

至: Shanxi Rayforce Manufacture Co., Ltd.
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Die casting
Die casting High precision die castinginvolves 3 key elements: the die casting machine, the mold, and the alloy materials, and the die casting could be describ...
Metal Casting
Metal Casting Casting process usually refers to the metal casting process, is one of heating processing technologies handled by humans can be found recorded as e...
Metal Casting
Metal Casting Casting process usually refers to the metal casting process, is one of heating processing technologies handled by humans can be found recorded as e...
Sand Casting
Sand Casting Sand casting is the most commonly applied method for casting the metal part. It suits most of the raw materials, ferroalloy, and non-ferroalloy bot...
Vacuum Investment Casting
Vacuum Investment Casting Vacuum investment castingis one of the precision investment casting methods. This special technic is mainly applying to producing the small but hig...
供应产品

Same products

METAL BRACKETS
METAL BRACKETS 卖方: JCL Precision Part Co.Ltd. Custom metal brackets are some of the strongest supports. JCL precision-engineers them to your cu...
陶瓷型芯注射机
陶瓷型芯注射机 卖方: 秦皇岛埃孚科技有限公司 陶瓷型芯注射机主要用于形状复杂,高品质、高精度铸件的陶瓷型芯的成型。该设备通过吸收国内外先进制造技术和精铸行业的自身特点,研制开发成功。 合模力:35T-100T
压蜡机
压蜡机 卖方: 秦皇岛埃孚科技有限公司 注蜡机用于精密铸造生产中蜡模的制作。合模力最大 :10T-150T
全自动脱蜡釜
全自动脱蜡釜 卖方: 秦皇岛埃孚科技有限公司 脱蜡釜,是精铸生产中的型壳脱蜡专用设备 内腔尺寸: Φ1000×1200mm/ Φ1200×1500mm/ Φ1400×1600mm
CNC TURNING
CNC TURNING 卖方: Baoji Haiqiao Industrial & Trading Co., Ltd. As a CNC turning manufacturerin China, HQ has the capacity to dealing with both small lot and mas...