Investment Casting

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. Investment casting mold generally refers to the mold made with meltable materials (such as wax, plastic, etc.) in very accurate dimensions. The types of the direct investment castingmold are applied to several layers of refractory coating, then heat it to create a solid and hard shell over the mold. The further step is to heat it at a very high temperature, so as to melt the inner mold so that let the fire-resistant shell is left. All these processes together we call "molding", which describes the basic method to make the shell that we desired for the next casting works.

After making the shell, the next casting works is similar to normal sand casting. Pouring the melted metal into the shell, wait until the casting part cools down. Then break the shell to acquire the finished part.

Lost Wax Investment Casting

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. It generally refers to the mold made by meltable materials (such as wax, plastic, etc.) in very accurate dimensions.

Silica Sol Investment Casting

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. It generally refers to the mold made by meltable materials (such as wax, plastic, etc.) in very accurate dimensions.

Stainless Steel Investment Casting

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. It generally refers to the mold made by meltable materials (such as wax, plastic, etc.) in very accurate dimensions.

Vacuum Investment Casting

Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. It generally refers to the mold made by meltable materials (such as wax, plastic, etc.) in very accurate dimensions.

What Are The Advantages Of Investment Casting Process Over Traditional Sand Casting Process?

1. investment casting technology, this kind of part can achieve mass production, which product consistency is approved as well.

What Is Investment Casting Process

The first process of investment casting production is the manufacture of the investment casting mold, which is used to form the model of the cavity in the refractory shell, so to obtain castings with high dimensional accuracy and surface finish. In addition, the performance of the investment casting mold itself should make the subsequent processes such as shell making as easy as possible. In order to get the above high-quality requirements of the investment casting mold, in addition to a good press (press molten die mold), but also must choose the appropriate investment casting materials (referred to as mold material) and reasonable mold making process.

Most of the production uses pressure to press the paste mold material into the pressed shape to make the investment casting mold. Before pressing the casting mold, a thin layer of the parting agent is applied to the surface of the mold so that the molten mold can be removed from the mold. When pressing a wax-based mold, the parting agent can be divided into machine oil, turpentine, etc.; when pressing a resin-based mold, a mixture of sesame oil and alcohol or silicone oil is often used as a parting agent. The thinner the parting agent layer, the better, so that the investment casting mold can better replicate the surface of the pressed mold and improve the surface finish of the molten mold. There are three methods of pressing the investment casting mold, plunger pressurization, pneumatic pressurization, and piston pressurization.

What Is Investment Casting

Investment casting is also called lost wax casting when the wax is used for the mold. Investment casting usually refers to a casting scheme in which to shape by fusible material, and the shape surface is coated with several layers of refractory material to make the shell. Then the shape is melted out of the shell, so as to obtain the investment casting without parting surface, and the casting scheme can be filled with sand after high-temperature roasting. Because the investment casting mold is widely made of wax material, investment casting is often called lost wax casting.

The types of alloys that can be produced by invest casting process include carbon steel, alloy steel, heat-resistant alloys, stainless steel, precision alloys, permanent magnet alloys, bearing alloys, copper alloys, aluminum alloys, titanium alloys, and ductile iron.

The shape of the investment casting mold is generally more complex, which can be cast out of the minimum diameter of the hole up to 0.5mm. The minimum wall thickness of the casting is 0.3mm. In the manufacturing process, some parts are originally made from a combination of several parts, by changing the structure of the parts, design to a whole part and cast directly from the investment casting mold, in order to save processing time and metal material consumption, so that the structure of the parts more reasonable.

Rayforce Manufacture is a private investment casting factory,we provide metal casting china, vacuum die casting, investment casting systems, apa itu investment casting, green sand metal castingand etc. Want to know investment casting priceor buy investment casting? Please contact us.

There are many metal casting companies, but we are one of the best choices for you.

Other supplier products

	Compressors & Gears	Rayforce's metal cast iron gearscan be applied to Turbo blowers, air control component, piston compressors, casting gears, etc. Application of C...
	Metal Casting	Casting process usually refers to the metal casting process, is one of heating processing technologies handled by humans can be found recorded as e...
	Low Pressure Die Casting	The low pressure die casting is to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting par...
	Low Pressure Die Casting	The low pressure die casting is to let the melted metal flow into the casting mold under a certain degree of pressure, and solidify the casting par...
	Investment Casting	Investment casting, also called the lost-wax casting process, is actually an ancient metal casting technology with a history of over 6,000 years. I...

供应产品

Same products

	METAL BRACKETS	卖方: JCL Precision Part Co.Ltd.	Custom metal brackets are some of the strongest supports. JCL precision-engineers them to your cu...
	陶瓷型芯注射机	卖方: 秦皇岛埃孚科技有限公司	陶瓷型芯注射机主要用于形状复杂，高品质、高精度铸件的陶瓷型芯的成型。该设备通过吸收国内外先进制造技术和精铸行业的自身特点，研制开发成功。 合模力：35T-100T
	压蜡机	卖方: 秦皇岛埃孚科技有限公司	注蜡机用于精密铸造生产中蜡模的制作。合模力最大 ：10T-150T
	全自动脱蜡釜	卖方: 秦皇岛埃孚科技有限公司	脱蜡釜，是精铸生产中的型壳脱蜡专用设备 内腔尺寸: Φ1000×1200mm/ Φ1200×1500mm/ Φ1400×1600mm
	CNC TURNING	卖方: Baoji Haiqiao Industrial & Trading Co., Ltd.	As a CNC turning manufacturerin China, HQ has the capacity to dealing with both small lot and mas...