Continuous inline sputtering silver mirror vacuum mirror line
This continuously glass mirror production line, it is a horizontal type of dual-end continuous coating equipment. It is a large size advanced technology product. It adopt plane magnetron sputtering technology and vacuum lock multi-chamber structure to ensure the purity of target material and the quality of deposition film suring continuous loading and unloading. The movements of machine is controlled by intelligent central computer which also monitors all the process and steps in real time. All the procedures are automatic besides glass feeding and loading. Therefore, it can produce high quality if deposit film and the stability of technical parameters.
The machine is mainly applied to the production mirror manufacturing. Meanwhile, it can be used for production of reflective glass. It coats sorts of solo metal film, multi-layer composite film or mirror film on high quality float glass to produce different effect.
This line is the best option for production architecture glass and mirrors.
System utilities
Electricity power:
-3 phases, 380 V +5%/-10% 50Hz, five wires (3 Ac, N, PE)
Cooling water specification
-Pressure: 2 to 3 bar
-Water out-let: 0.5 bar below
-Cooling water inlet temperature range: less than 25 Celsius
-Hardness of water: 0.04mg/l (equivalent)
-Electric conductivity: 1000μS/cm
-PH-value: 7.5-8
Compressed air
-Inlet pressure: 5 to 7 bar
-Dew point under pressure max. + 2.5 Celsius
-Free of oil and dust
Nitrogen
For the venting of chambers
-Inlet pressure: max: 1 bar
-Purity: 99.9%
Sputtering gas
-Sputter gas: Argon, Oxygen, Nitrogen
-Purity of sputter gas ni less than 99.99%
-Inlet pressure: max.2 bar absolute
Ambient requirements
-For temperature at machine and control room: 20 Celsius to 25 Celsius
-Relative humidity: 70-80%
Other supplier products
|
|
Toy parts vacuum aluminum metallizing plating machine |
Vacuum Metalizing, Plastic Plating, Plastic Chrome, Chrome Plating, Physical Vapor Deposition, PVD, Reflective Coatings and Thin Film Coatings are ... |
|
|
PVD coating system Aluminum evaporation coating / vacuum metallizing machine |
Basically it is one form of Physical vapor deposition. Essentially, this process was developed to imbue non-metal items with metallic properties A ... |
|
|
Shoe heels ABS vacuum metallising equipment Vacuum PVD systems/coating machine |
Vacuum Metalizing can provide: Highly reflective chrome like surface. Low cost when compared to other plating methods. Will not bury the detail in ... |
|
|
SUS metal Stainless steel sheets PVD golden coating equipment/machine |
Application of the machine: The coating machine is used to coat decorative film, especially coat the metal film, namely the term IPS in the clocks ... |
|
|
Physical vapor deposition PVD arc deposition machine for hard coatings on steel tools |
General Information: High capacity hard coating unit Easy operation and maintenance Coatings on HSS steel and other tools, molds Hard coatings: Mo... |
供应产品
Same products
