2 部分树脂粘合和密封、灌封、垫片、就地成型垫片 (FIPG) 热间隙填充机
Features
Independent development 5-Axis Linkage PCB boards, help produce various shapes product such as round, square, oval, prismatic, trapezoid etc. special shapes.
Adopt international brand servo motor for X/Y axis of worktable, PCB boards supply reimbursed time, ensure synchronization between casting and waling of mixing head.
Adopt high precision metering low speed metering pumps, variable frequency speed regulation, ratio accuracy, output error ≤ 0.5%.
Adopt Rotary valve type mixing head to ensure synchronism of A/B component discharging. Mixing head will return to the beginning to clean and air push after casting works automatically.
Weight (kg) 1200kg
Processing type Foaming machine
Product Category Foam Net
Voltage 380/400 volts
Dimensions (length*width*height) 3.2x1.6x1.8 meters
Power (kW) 10kW
Raw material Polyurethane material A+B
Output 6-16 g/s
A/B tank 80L/80L
Speed 3000-5500 rpm
Overall dimensions: 3200x1500mm
Walking speed 0-400mm/s
Mixing range A:B A:B=100:25-35
Controller system Brand computer with CAD programming
Maximum Linear Rate Maximum. 400mm/sec
Measurement error < 0.5%
在线联系供应商
Other supplier products
 |
JYYJ-3D喷涂发泡机 | -Voltage：220V 50HZ -Heating Power：7KW -OUTPUT：2-10kg/Min -MAX OUTPUT (Mpa)：25Mpa -Matrial A:B=1:1 -spray gun: (set)：1 -Feeding pump ：2 -Barr... |
 |
五亚甲基高压PU发泡机/高压环戊烷聚氨酯机 | Features:1. The metering is accurate, and the high-precision metering device is adopted, and the metering accuracy is high. The meteringpump adopts... |
 |
高效、环保、节能的聚氨酯发泡注射机。 | InjectionPressure 0.01-0.1MpaInjectionflowrate 6-50g/s1-3Kg/minMixingratiorange 100:10～20（adjustable）Injectiontime 0.5～99.99S(correctto0.01S)Temper... |
 |
低压PU发泡机 | FoamapplicationFlexiblefoamrawmaterialviscosity（22℃） ～3000CPS多异氰酸酯～1000MPasInjectionOutput 3.1-12.5g/sMixingratiorange 100：28～48Mixinghead2800-5000... |
 |
高压聚氨酯泡沫注射机 | Product Features of High Pressure PU Machine:1. Material injection mixing head can freely move forward and backward, left and right, up and down;2.... |
Same products
 |
JYYJ-H-V6聚氨酯泡沫喷涂机 | 卖方: 824810 | -Voltage：380V 50HZ -Heating Power：22KW-26KW -OUTPUT：2-10kg/Min -MAX OUTPUT (Mpa）：36Mpa -Matri... |
 |
JYYJ-Q200D聚氨酯泡沫喷涂机 | 卖方: 824810 | -Voltage：380V 50HZ -Heating Power：11KW -OUTPUT：2-10kg/Min -MAX OUTPUT (Mpa）：25Mpa -Matrial A:... |
|
|
五亚甲基高压PU发泡机/高压环戊烷聚氨酯机 | 卖方: 824810 | Features:1. The metering is accurate, and the high-precision metering device is adopted, and the ... |
|
|
高压聚氨酯泡沫注射机 | 卖方: 824810 | Product Features of High Pressure PU Machine:1. Material injection mixing head can freely move fo... |
|
|
2 部分树脂粘合和密封、灌封、垫片、就地成型垫片 (FIPG) 热间隙填充机 | 卖方: 824810 | FeaturesIndependent development 5-Axis Linkage PCB boards, help produce various shapes product su... |
