BTT-02 Ball Tack Tester
Inclined Type Ball Tack Testeris equipped with the inclined plate of 20°, 30° or 40° inclined angle. The inclined plate is a smooth and flat one made of aluminum.
A steel ball of various specifications is placed at the upper part of the inclined plane, followed in lower 100mm section is the approach table, where the ball can accelerate after released. The test sample is placed below the approached table in the next 100mm.
The Rolling Ball Tack Testeris released and sticked at the test area.
Test Principle of BTT-02 Inclined Type Ball Tack Tester
The initial tack of the sample is tested through the adhesion of the adhesive tape to the steel ball when there is brief contact between the steel ball and the adhesive surface of the pressure-sensitive tape sample with a small pressure. It is suitable for testing the adhesion of adhesive tapes, labels, and other products to steel balls to test the initial tack of the sample.
Gently release the steel balls from the starting point on the inclined plate. Record the biggest steel ball that canbe stuck by sample.Repeat tests with theballs of adjacent numbers of that largest one to confirmif it’s that largest one to be stuck.
The numerical value obtained from multiplying the nominal size of a ball is called the ball number.
Record a result by the ball number. Further, record the angle of an inclined plate.
BTT-02 Ball Tack TesterSpecification
|
Inclined Angle |
0~60° |
|
Test Area Width |
120mm |
|
Rolling Ball |
1/32~1 inch |
|
Dimension |
320x140x180mm LWH |
|
Weight |
6kg |
在线联系供应商
Other supplier products
 |
HTT-02 Hot Tack Tester | The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the strength of heat seals formed between thermoplastic sur... |
 |
FTT-01 Film Thickness Tester | The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness of various materials, including plastic films, she... |
 |
LSST-01 Leak and Seal Strength Tester | TheLSST-01 Leak and Seal Strength Testeris designed for the evaluation of seal performance and integrity in a wide range of packaging materials. Ut... |
 |
Mop Friction Force Tester | Mops are indispensable tools for both household and commercial cleaning, and their frictional performance directly impacts cleaning effectiveness a... |
|
|
BTT-02 Ball Tack Tester | Inclined Type Ball Tack Testeris equipped with the inclined plate of 20°, 30° or 40° inclined angle. The inclined plate is a smooth and... |
Same products
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | 卖方: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM卡测试仪用于检测SIM卡电路，支持iPhone 14/15/16/17 Pro Max和安卓手机的双SIM卡检测。配备LED数字显示屏，支持Type-C充电，即插... |
 |
Fabric Thickness Tester | 卖方: Cell Instruments Co., Ltd | Fabric Thickness Testeris used to measure the thickness of various types of textiles, such as wov... |
|
|
Mop Friction Force Tester | 卖方: Cell Instruments Co., Ltd | Mops are indispensable tools for both household and commercial cleaning, and their frictional per... |
 |
BCT Box Compression Tester | 卖方: Cell Instruments Co., Ltd | BoxCompression testeris used for measuring the ability of packaged freights and containers, made ... |
|
|
BTT-02 Ball Tack Tester | 卖方: Cell Instruments Co., Ltd | Inclined Type Ball Tack Testeris equipped with the inclined plate of 20°, 30° or 40° ... |
