Midsole Fibreboard Bending Test Machine - STD G664
Product Introduction:
G664 mid-sole fiberboard zigzag testing machine Test leather shoes and casual shoes, walking shoes and other travel shoes, mid-sole fiberboard zigzag resistance quality.
One end of the sample of shoe fiberboard material is hung in a weight, and one end is fixed in the fixture is continuously reciprocated to the left and right each bending 90 degrees, testing a certain number of times until the break, the number of breaks to determine the flexion index of the bottom plate, as a basis for comparison and selection of the bottom plate.
Reference standard:
QB/T 1472. BS 5131:4.2. SATRA TM3. PM4. PM5. PM6. PM15. PM16. QB/T4329-2012 standard
Product Advantages:
Measures Key Durability: Quantifies the resistance of mid-sole fibreboard to repeated bending and fatigue cracking under tension.
Standard Compliant: Designed to meet relevant national and international standards for testing fibreboard and footwear components (QB/T 1472. BS 5131. SATRA TM3. etc.).
Quantitative Result: Provides an objective numerical result (cycles to break/flexion index) for comparing material performance.
Multiple Testing Stations: Allows simultaneous testing of 6 samples, significantly increasing testing throughput.
Controllable Test Parameters: Enables precise control of the bending angle, speed, and applied tension (via the weight).
Automatic Counting: The integrated counter automatically tracks the number of cycles until sample failure.
Precise Speed Control: The variable frequency motor ensures stable and accurate flexing speed.
Product Features:
Multiple test fixtures/stations (6) for simultaneous testing.
Clamping mechanism at one end of each station to fix the fibreboard sample.
System at the other end of each station to attach a weight (approx. 2kg including clamp) to apply tension to the sample.
Mechanism for continuous reciprocating bending of the samples through a 90° angle.
Controllable flexing speed (60 ± 10 r/min) driven by a variable frequency motor.
LCD digital counter for each station (up to 999.999 cycles) to record cycles to sample break.
Sample holders with specified upper and lower clip lengths (15mm and 10mm) to hold the 80x10mm test piece.
Designed for testing fibreboard samples of a specific size (80x10mm).
Technical specifications:
1. Test fixture: 6
2. Test piece: 80×10mm
3. Reciprocating Angle: 90°
4. The weight includes the clamp: (2±0.01kg)×6
5. Tortuous speed: (60±10)r/min
6. Counter: LCD, 0——999999(7 groups)
7. Sample holder: upper clip length 15mm, lower clip length 10mm
8. Motor: variable frequency motor
9. Volume: 109×26×34cm
10. Power supply: 1∮，AC220V,3A
在线联系供应商
Other supplier products
 |
Mask BFE Testing Machine - G299 丨Mask Bacterial Filtration Efficiency Tester | Mask BFE Testing Machineis used to test the percentage of material containing bacterial suspended particles at a specific flow rate. Features 1. ... |
 |
Water bath indentation hardness tester / Indentation Resistance Tester | Product Introduction: Water bath indentation hardness tester is used to determine the indentation hardness of extruded polyethylene anticorrosive ... |
 |
Film Heat Shrinkage Tester ASTM D2732 | The film heat shrinkage rate tester is a device specifically designed to measure the shrinkage performance of film materials under heating conditio... |
 |
Spray Rating Tester | Textile Testing Products | Standards: ISO 4920. BS EN 24920. BS 3702. GB/T 4745. AATCC 22. M&S P23. NEXT 23 Applications: Spray Rating Tester is used to determine the ... |
 |
TTF tensile testing machine / TTF Tensile Tester | Product Introduction: The TTF tensile testing machine is designed to provide high and stable tensile forces in tensile tests. Mostly for toys Des... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
