.

Geotextile Dynamic Puncture Tester ISO 13433

Scope of application:

It is used to test the penetration ability of various geomaterials to resist steel cones falling from a fixed height, so as to characterize the rock fall resistance performance of ten geomaterials.

Meet the standard:

JTG E50. ISO/DIS 13433. GB/T17630

Technical parameters:

1. clamping ring diameter :150+0.5(mm)

2. Distance from steel cone tip to sample :500+2(mm)

3. stainless steel cone: cone Angle :45°, total mass :1000+5(g)

4. measuring cone mass :600+5(g)

5. overall size :435x575x1600(mm)


在线联系供应商

至: Standard Group (Hong Kong) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Helmet UV Pretreatment Box Tester / Helmet UV pretreatment box
Helmet UV Pretreatment Box Tester / Helmet UV pretreatment box Product Introduction Helmet ultraviolet pretreatment box is used for helmet ultraviolet irradiation pretreatment, according to the new national st...
Rubber Mooney Viscosity Tester 丨Mooney Viscometer
Rubber Mooney Viscosity Tester 丨Mooney Viscometer Test principle: The Mooney viscometer is used to measure the viscosity of rubber under specific conditions. In the test, the rubber sample was loa...
Film impact tester ISO 6272
Film impact tester ISO 6272 Product Introduction The film impact testing machine, through the hemispherical punch at a certain speed, impacts and passes through the film samp...
Spectrophotometer ISO 7724-1
Spectrophotometer ISO 7724-1 Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement standards. ASTM E1164. DIN 5033: Compliant with industri...
Shoe Insulation Tester | Thermal Performance Test
Shoe Insulation Tester | Thermal Performance Test Application: Shoes Heat Insulation Tester is used to test shoe heat insulation / thermal insulation against hot performance. Place the shoe in san...
供应产品

Same products

Bottle Wall and Bottom Thickness Tester
Bottle Wall and Bottom Thickness Tester 卖方: Standard Group (Hong Kong) Limited The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
Pinhole Tester / Pinhole Testing Equipment
Pinhole Tester / Pinhole Testing Equipment 卖方: Standard Group (Hong Kong) Limited The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
Cork Puncture and Chip Detection Instrument
Cork Puncture and Chip Detection Instrument 卖方: Standard Group (Hong Kong) Limited The rubber stopper puncture debris detector is a device specifically used to detect the number of...
Aluminum Ointment Tube Toughness Tester
Aluminum Ointment Tube Toughness Tester 卖方: Standard Group (Hong Kong) Limited The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
Vacuum leak tester / Vacuum leak instrument
Vacuum leak tester / Vacuum leak instrument 卖方: Standard Group (Hong Kong) Limited Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...