Geotextile wear tester丨Geotextile Test Machine
Scope of application:
The wear resistance of geotextile and its related products was measured by emery cloth-sliding block method. During the experiment, the sample is mounted on a fixed platform and rubbed with an abrasive with specified surface properties. Under the condition of controlling the pressure and friction action, the abrasive moves in a straight line along the horizontal axis. Wear resistance is expressed as the percentage loss of tensile strength of the specimen before and after friction.
Meet the standard:
GB/T 17636-1998.1S0 13427-1998.etc
Instrument features:
Applicable to textiles and related products:
Stainless steel structure, durable;
Special fixture design, easy to install the sample, to avoid the sample slipping during the test;
Friction cycle can be set:
Easy to install and operate.
Technical parameters:
Effective friction area 50x200mm 75x200mm
Reciprocating frequency 90 reciprocating times/min 10——115 reciprocating times/min
Reciprocating stroke 25±1mm 25±1mm
Load 6+0.01kg 1±0.01kg
Count range 1 to 9999 cycles configurable
Power supply AC 220V 50Hz
Standard configuration:
1. One host
2. One counterweight
3. Five pieces of dry abrasive cloth
4. Product packing list 1 copy
5. 1 copy of product manual
6. One copy of product certificate
在线联系供应商
Other supplier products
 |
Geosynthetic creep tester 丨Geotextile Test Machine | Scope of application: STD DW1290 series geosynthetics creep test system is used to determine the tensile creep properties of geosynthetics product... |
 |
Geosynthetic Transmissivity Tester丨Geotextile Test Machine | Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s... |
 |
Rubber Mooney Viscosity Tester 丨Mooney Viscometer | Test principle: The Mooney viscometer is used to measure the viscosity of rubber under specific conditions. In the test, the rubber sample was loa... |
 |
Pinhole Tester / Pinhole Testing Equipment | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in aluminum foil materials. The following is a detail... |
 |
Abrasion testing machine / Abrasion Testers | Product Introduction Wear testing machine is used with the balance, specially testing the wear resistance of rubber products such as soles, tires,... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
|
|
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
