Geosynthetic creep tester 丨Geotextile Test Machine
Scope of application:
STD DW1290 series geosynthetics creep test system is used to determine the tensile creep properties of geosynthetics products.
Meet the standard:
GB/T17637-1998.ISO/FDIS 13431-1998.ASTM D 5262-2007.JTG E50 T1131-2006.QB/T 2854-2007.etc
Instrument features:
The instrument has the advantages of simple structure, beautiful appearance, stable performance, safety and reliability;
Microcomputer control, LCD display, touch screen operation, simple and convenient:
Electronic loading system, sample load is stable and accurate;
High-speed data acquisition and signal transmission system, real-time data acquisition and signal transmission, accurate and reliable;
High precision sensor, rapid response, good repeatability, stable and reliable performance;
Special fixture accessories, prevent sample slip and damage in the test process, sample loading is labor-saving, convenient and reliable;
Can be customized station, can measure multiple samples at the same time, high efficiency and energy saving;
High precision temperature control equipment, good uniformity;
Normal pressure loading system, using large diameter pressure cylinder to achieve convenient and reliable;
Movable normal loading system to eliminate machine system error:
The local displacement measuring device can realize real-time measurement of the change of the elongation between any two points on the sample under normal pressure.
Easy to install, easy to operate, long service life.
Technical parameters:
Number of stations 113 stations
Model Horizontal horizontal vertical
Loading mode Electronic Electronic mechanical
Measuring range 0——50kN 0—— 20kN
Resolution of force value is 0.01kN
Force value accuracy ±1%FS
Maximum tensile displacement 550mm 600mm
Displacement accuracy 0.03mm 0.02
Speed 0.3mm——50mm/min
Temperature control (optional) -30——70℃℃ can be customized
在线联系供应商
Other supplier products
 |
Schopper Folding Endurance Tester ISO 5626 | Use and Scope of application: 1. the instrument is suitable for tensile strength greater than 1.33kn/m, thickness less than 0.25mm paper folding d... |
 |
Hydrostatic Head Testing Equipment | Hydrostatic Head Tester | Introduction The hydrostatic head tester is designed to test the pressure that the material does not come into contact with the exuded water dropl... |
 |
Mask BFE Testing Machine - G299 丨Mask Bacterial Filtration Efficiency Tester | Mask BFE Testing Machineis used to test the percentage of material containing bacterial suspended particles at a specific flow rate. Features 1. ... |
 |
Full Notch Creep Tester / Full Notch Creep Test FNCT | Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable f... |
 |
Water-cooled Light & Weather Fastness Tester -QINSUN SI 4000 | SI4000 water cooled sunlight fastness tester -The color and properties change of textile dyes can be tested by using argon arc lamp to simulate and... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | 卖方: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | 卖方: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | 卖方: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | 卖方: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | 卖方: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
