The resistance tester for protective clothing materials against metal molten liq/
Standards:
BS EN 348:1992 Protective clothing. Heat-resistant and fire-resistant. Determination of heat transfer in proximity to fire. ISO 9185 - 2011 Protective clothing. Evaluation of material resistance to metal molten liquid penetration. AQ 6103 - 2007 Welder's protective gloves. GB 8965.2 - 2009 Protective clothing. Flame retardant protection. Part 2: Welding clothes.
Product Information:
The resistance tester for protective clothing materials against metal molten liquid penetration is developed in accordance with testing standards such as ISO 9150. EN 348. GB/T 17599. AQ6103. GB 8965.2. etc. It is applicable to the protective performance of various fabrics and composite fabrics against burns caused by molten metal splashes on the human body. The protective clothing metal molten bead splash tester can evaluate the material's resistance to liquid metal splashes. During the test, an appropriate amount of molten metal is splashed onto the sample placed at a certain angle. A PVC film is attached to the back of the sample and in contact with it. The damage situation is evaluated by recording the changes in the PVC film after the splashing process. Based on the test results, repeat the test with more or less metal until the damage to the PVC film is minimized. A furnace with an induction coil and a high-frequency generator melts the metal. A high-performance optical fiber dual-color pyrometer is used for temperature control and measurement of the splashing temperature. The temperature controller adjusts the temperature between 700°C and 1800°C. A stepper motor controls the tilting speed and angle. The cooling device uses the water flow connected to the inlet and outlet of the equipment for cooling.
在线联系供应商
Other supplier products
 |
Photovoltaic module damp heat test chamber | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 1073: Standard for Safety for Enclo... |
 |
Helmet Webbing Micro - displacement Abrasion Tester/ Helmet strap friction tester/ Helmet Webbing Friction Tester | Ensuring Helmet Integrity: The Helmet Webbing Micro-Displacement Abrasion Tester In the world of protective headgear, the webbing system within ... |
 |
Socks waterproof testing machine | Product Information: Reference standard: HG/T 3664-2000, GB 25037-2010 and other standards Test principle: Pour air into the stocking through... |
 |
Water Cooled Xenon Arc Lamp Weather-Resistant Test Chamber | Water Cooled Xenon Arc Lamp Weather-Resistant Test Chamber - Weather resistance and aging test equipment price - standard Standards: GB/ t1865-... |
 |
Dental Implants Fatigue Tester | Standard ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental implants, including load ratios, frequency, and failu... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
