The resistance tester for protective clothing materials against metal molten liq/ISO 9150/ AQ6103
Standards:
BS EN 348:1992 Protective clothing. Heat-resistant and fire-resistant. Determination of heat transfer in proximity to fire. ISO 9185 - 2011 Protective clothing. Evaluation of material resistance to metal molten liquid penetration. AQ 6103 - 2007 Welder's protective gloves. GB 8965.2 - 2009 Protective clothing. Flame retardant protection. Part 2: Welding clothes.
Product Information:
The resistance tester for protective clothing materials against metal molten liquid penetration is developed in accordance with testing standards such as ISO 9150. EN 348. GB/T 17599. AQ6103. GB 8965.2. etc. It is applicable to the protective performance of various fabrics and composite fabrics against burns caused by molten metal splashes on the human body. The protective clothing metal molten bead splash tester can evaluate the material's resistance to liquid metal splashes. During the test, an appropriate amount of molten metal is splashed onto the sample placed at a certain angle. A PVC film is attached to the back of the sample and in contact with it. The damage situation is evaluated by recording the changes in the PVC film after the splashing process. Based on the test results, repeat the test with more or less metal until the damage to the PVC film is minimized. A furnace with an induction coil and a high-frequency generator melts the metal. A high-performance optical fiber dual-color pyrometer is used for temperature control and measurement of the splashing temperature. The temperature controller adjusts the temperature between 700°C and 1800°C. A stepper motor controls the tilting speed and angle. The cooling device uses the water flow connected to the inlet and outlet of the equipment for cooling.
Send product request
Other supplier products
 |
Battery Heat Generation Tester/ Battery Safety Testing Equipment/ Battery Thermal Runaway Calorimeter | Reference Standards GB/T 36276 - 2023 *Lithium - ion Batteries for Electric Power Energy Storage UL 9540A ASTM E1981 - 98(2012) SN/T 3078.1 - 2... |
 |
Total Knee Joint Prostheses Wear Tester | Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, including axial loading, flexion/extension kinematics, a... |
 |
Pipes Hydrostatic Testing Machine/ Pipeline Pressure Resistance Tester / Pipe Burst Pressure Tester | Standard ISO 1167: For thermoplastics pipe systems under constant internal pressure. ASTM D 1598: Standard test method for time-to-failure of p... |
 |
Cleanliness automatic extractor | Product Introduction: The cleanliness extraction equipment is mainly used to clean the cavity channels, blind holes, and the overall surface of th... |
 |
Bulk Density Tester | bulk density tester is designed and developed by our company according to the "National Standard of the People's Republic of China GB-T6286-1986" m... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
