Wet penetration tester EN ISO 22610 EN 14126

• 

Wet penetration tester Application:

Protective Clothing Tester Wet Microorganism Bacterial Penetration Resistance Tester Apparatus: used to measure the penetration performance of bacteria in the liquid when the material is subjected to mechanical friction (the shielding performance of the liquid against bacterial penetration by the mechanical friction chamber)

Wet penetration tester Standards:

EN ISO 22610. EN 14126. Annex A, YY/T 0506.6

Wet penetration tester Feature:

Automatic stop as preset counters.

High stable testing performance from precise structure design.

Stainless steel body provides high corrosion resistant performance.

Adjustable loading pressure.

Wet penetration tester Specifications:

Rotary speed: (60 ± 1)rpm

The test refers to the pressure on the material: (3±0.02)N

Outward wheel speed: 5~6 rpm

Timer set range: 0~99.99min

The inner and outer ring weights: (800±1)g

Wet penetration tester Principle:

Place the specimen on AGAR plate. A piece of the same specification is placed on the specimen. Cover with a high density polyethylene film about 10 microns thick. The three layers of material using the cone steel ring (the test material below, the mushroom center, high density polyethylene film on top) are stuck together. Place the ring on the AGAR plate on the turntable. The experiment means that the material can be applied to the material in a way that can be moved on the surface of the whole plate, so that the material is subjected to the combination of pressure and friction.

This model can simulate the force condition of the barrier material in the actual application and the microorganism penetration under the wet conditions.

The microbes on the microbial migrate to the surface of the AGAR plate after penetrating the experimental material. Through the culture and colony count of AGAR plate, the penetration performance of the test material can be quantitatively evaluated.

Wet penetration tester Parameters:

Other supplier products

	Spinal Internal Fixation System Component Testing Machine	Standard YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and conn...
	Dental Implants Fatigue Tester	Standard ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental implants, including load ratios, frequency, and failu...
	Sweating Guarded Hotplate/ Thermal Insulation and Moisture Permeability Tester / Fabric Thermal Resistance Tester	Testing Standards:GB/T 11048, ISO 11092, ASTM F1868, ASTM D1518, JIS L1096 Application The Thermal resistance wet resistance tester simulates t...
	Respirator Fit Tester	Product Information The Protective Mask Leak Tester is a portable device designed to detect the service performance and applicability of protectiv...
	In situ multi-channel storage gas production test system	Standard UL 1642: Standard for Lithium Batteries IEC 62133-2: Secondary Cells and Batteries Containing Alkaline or Non-Acid Electrolytes UN 38.3...

Same products

	Plastic Smoke Density Tester F313	Seller: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Seller: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Seller: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Seller: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Seller: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...