rain tester AATCC 35 BS EN ISO 22958

Standards:

AATCC 35. BS EN ISO 22958

Applications:

Rain Tester is designed for determining the water-repellent property of fabrics or composite materialsunder different rainfall pressure.

Product Information:

This instrument can simulate rain horizontally spraying to the tested sample which is vertically fixed in the stainless steel tank. The back of the specimen is adhered to the standard suction filter paper (weighing before and after the test). The water in the water column is sprayed into the rain by the standard nozzle, while the water column can be changed from 600mm(24 inches) to 2400mm(96 inches) by 300mm inciments (12 inches).

The rainproof tester provides an LCD color touch screen with an interactive user interface, which can preset the ISO and AATCC test standards, water temperature, water column height and test time. The built-in cistern can recycle the water that is sprayed on the sample, with a heater that controls the water temperature. The precision water pump can automatically maintain the water column in the nozzle to the set the height.

The tester cannot be refitted, but can be ordered with new rain tester. We can provide a temperature-controlled water supply system that includes an electronic temperature controller, a mixing tank, and a solenoid control valve.

Techncial Parameters:

1. Control: LCD color touch panel;

2. Water column: 60 ~ 150cm + 1.5cm (standard), 60 ~ 240cm + 1.5cm (extension);

3. Sample rack: 285 by 190mm (305mm from the nozzle);

4. Heater: 1000W;

5. Temperature control: room temperature 40 ℃ ~ + / - 0.8 ℃ (no cooling device);

6. Supply of water: tap water or distilled water;

7. Reservoir: 40L;

8. Dimensions: 700 x 600 * 2460mm (long x width x height);

9. Weight: 125kg(275lb);

10. Power supply: 23/120vac, 50/60hz.

Configuration:

1. Anti-rain testing instrument with LCD color touch screen control panel;

2. Water column pipe, 240cm;

3. Standard sprinkler nozzle;

4. Sample rack and chassis;

5. 40L reservoir;

6. 150cm water column tube (optional);

7. AATCC filter paper 500 x 1000mm(25 pieces) (optional).

Other supplier products

	ICI Mace Snag Tester	Introduction ICI Mace Snag Tester is suitable for the snagging performance test of knitted fabrics and woven fabrics in outwear as well as other f...
	Automatic coating thickness measuring instrument/	Product features: 1. Strictly in accordance with the standard design of the contact area and measurement pressure, while supporting a variety of n...
	Gravel Impact Testing Machine	Standards: SAE J400.VDA 621427.ISO 20567-1.ASTM D3170.GMW14668-3.4.9.Peugeot/Citroen D241312.Chrysler 463PB-52-01 、Chrysler 463PB-39-01.Mazda MES ...
	KES - FB2 - SH Single - Strand Bending Tester	Content The Single Fiber Bending Tester makes it possible to easily measure and quantify softness, elasticity, and diffusion differences in a si...
	Total Knee Joint Prostheses Wear Tester	Standard ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, including axial loading, flexion/extension kinematics, a...

供应产品

Same products

	Plastic Smoke Density Tester F313	卖方: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	卖方: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	卖方: 上海千实精密仪器	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	卖方: 上海千实精密仪器	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	卖方: 上海千实精密仪器	Product details Furniture flammability tester is mainly used to test the combustion performance ...