.

Safety Helmet Roll-off Testing Equipment

Purpose

Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain height so that the impact force is also applied to the helmet. In this way, the wearing stability performance of the helmet can be evaluated.

Test standard:

IS 4151 , ECE R22.05

Mass of initial load: 3 kg ± 0.1 kg

Mass of falling weight: 10 kg ± 0.01 kg

Lowering height: 0.5 meters ± 0.01 meters

Measuring method: manual

Electricity: 220V 50HZ

Test theory: vertical descent

Test steps:

1. previously to the ambient temperature and sanitary conditions for the conditions of the helmet, should be placed on the appropriate head shape and fixed in the appropriate head.

2. In the median vertical plane of the helmet, a device that guides and releases the fall with a total mass of 3 kg ± 0.1 kg is attached to the rear of the shell.

3. 10 kg ± 0.01 kg of falling mass is released and lowered from a height of 0.5 m ± 0.01 m. The guiding device should ensure that the impact velocity is not less than 95% of the theoretical velocity.


在线联系供应商

至: 上海千实精密仪器
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Safety Helmets Impact and Penetration Resistance Tester
Safety Helmets Impact and Penetration Resistance Tester Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact...
Cylindrical Battery In-Situ Volume Swelling Testing System
Cylindrical Battery In-Situ Volume Swelling Testing System Standard UL 1642: Standard for Lithium Batteries IEC 62660-2: Secondary Lithium-Ion Cells – Part 2: Reliability and Abuse Testing ASTM E...
STD Battery short-circuit tester
STD Battery short-circuit tester Product Introduction Battery Short Circuit Tester is a device that can be applied to the external short circuit test process of lithium ion batter...
Enamel Boiling Water Mass Loss Tester
Enamel Boiling Water Mass Loss Tester Product Introduction: The enamel layer boiling water weight loss tester is designed according to QB/T 2590-2003 Appendix A, GBT99892-2015 /ISO 287...
Hydrogen Sulfide Corrosion Test Chamber
Hydrogen Sulfide Corrosion Test Chamber Referenced Standards: Complies with national standard GB/T 978.9-88 "Corrosion Test of Metal and Non-Metal Coatings Under Condensing Sulfur Dioxid...
供应产品

Same products

FH-77富氢测试笔
FH-77富氢测试笔 卖方: 科立龙电子股份有限公司 产品说明: 用于测量氢气水(富氢水)和氢气水发生器的溶解氢含量。 特征: 1、电极更换方便 智能、携带方便、操作方便、实用; 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber 卖方: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 卖方: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...