Protective Clothing Resistance Test device
Related Standards
GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for Surface Resistivity
GB/T 22043 - 2008 Clothing - Anti-static Performance - Test Method for Resistance Through the Material (Vertical Resistance)
GB 12014 - 2009 Anti-static Clothing
GB/T 12703.4 - 2010 Textiles - Evaluation of Electrostatic Properties - Part 4: Resistivity
EN 1149 - 1 - 2006 Protective Clothing - Electrostatic Properties - Part 1: Surface Resistivity Test Method and Requirements
EN 1149 - 2 - 1997 Protective Clothing - Electrostatic Properties - Part 2: Resistance Through the Material - Vertical Resistance Test Method
AATCC 76 Fabric Surface Resistivity
ANSI / ESD STM2.1 Anti-static Clothing Resistance Test Method - American Standard
Scope of Application
This machine is used for the point-to-point resistivity test of anti-static work clothes and anti-static fabrics, complying with different testing standards such as national standards and European standards. It is equipped with the TEST V1.6 dedicated testing software, which can realize online operation, automatically complete the sample test according to the standard regulations, process the test results, edit and print the test reports.
Instrument Configuration
Standard configuration of the instrument:
(1) 1 set of computer operating system software
(2) 1 main unit of the tester
(3) 1 set of standard point-to-point heavy hammer electrodes for the instrument
(4) 1 set of standard ring combination electrodes for the instrument
(5) 2 measurement cables; 1 power cord.
(6) 1 user manual;
(7) 1 certificate of conformity;
(8) 1 packing list.
Technical Parameters
Resistance measurement range: 104Ω ～ 1016Ω.
LCD display: Surface resistance, temperature, current, voltage, test time, and test sample data can be input; units can be switched (mm, cm, m).
Built-in test voltage: Any value from 0 - 1000V can be set.
Basic accuracy: < 1G ± 1%; >= 1G ± 3%; >= 1T ± 10%. The accuracy deviation values in different ranges are different.
Operating environment: Temperature: 0℃ ～ 40℃, relative humidity < 80%.
Internal test voltage: Any value from 10/50/100/250/500/1000V can be set.
Power supply: AC 220V, 50HZ, power consumption is about 5W.
Measurement mode: Manual/automatic range. With PC testing software (optional), USB communication interface, and the software interface synchronously displays, analyzes, saves and prints data!
Common electrode (fixture) device options:
Type A: Heavy hammer electrode (for point-to-point resistance test of fabric surface)
Type B: Ring combination electrode (for fabric surface resistivity test and fabric vertical resistance test)
Dimensions of the main unit: 330mm * 340mm * 120mm
在线联系供应商
Other supplier products
 |
Thermal cycle wet freezing testing machine | The Thermal Cycle Wet Freezing Testing Machine is designed for comprehensive environmental testing, capable of simulating extreme temperature and h... |
 |
Electric hook core bending resistance testing machine | Product Introduction: The electric hook core anti-bending performance tester is used to test the anti-bending performance of the steel hook core. ... |
 |
Electric pencil hardness tester | The Electric Pencil Hardness Tester is designed to determine the surface hardness of coating layers applied to finished products by means of a stan... |
 |
Battery Slurry Resistance Tester | The Battery Slurry Resistance Tester is a precision testing system designed to measure the resistivity of high-solid battery slurries and conductiv... |
 |
Helmets Designated Protection Areas Tester | The helmet designated protection area testing device is a piece of equipment used to mark test points and lines on helmets, and is suitable for all... |
Same products
 |
Xenon Test Chamber | 卖方: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | 卖方: 上海千实精密仪器 | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | 卖方: 上海千实精密仪器 | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | 卖方: 上海千实精密仪器 | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | 卖方: 上海千实精密仪器 | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
