Mirror-finish titanium carbide guide wheels
The installation holes of the guide wheel have high precision, and the fit clearance with the shaft can be controlled within 0.005-0.01mm, ensuring no shaking during rotation and improving the guiding accuracy. Its maintenance cost is low, and it does not require frequent lubrication. Only regular cleaning of surface impurities is needed, making it suitable for continuous operation of automated production lines. In the production of metal wire mesh, guide wheels can ensure the uniformity of the mesh holes of the wire mesh, keeping the error within 5% and meeting the strict requirements of filter materials. Hard alloy titanium carbide guide wheels are key guiding components in the production of wire and tube materials. They are made by powder metallurgy sintering of high-purity titanium carbide and cobalt binder phases, with a surface hardness as high as HRC88 and wear resistance more than 50 times that of steel guide wheels. The roundness error is controlled within 0.002mm to ensure smooth operation of the wire during high-speed drawing (up to 100m/s), avoiding jitter or offset. In the production of stainless steel wire, the use of this guide wheel can reduce the surface roughness of the steel wire from Ra1.6μm to Ra0.4μm, significantly improving product quality.
在线联系供应商
Other supplier products
 |
Customised slotted carbide guide wheels | The surface of the guide wheel can be specially treated according to requirements, such as coating with a diamond coating, which further improves... |
 |
Industrial-grade titanium carbide rods - excellent fatigue resistance | As a key material in the high-end manufacturing field, hard alloy titanium carbide round rods have excellent corrosion resistance and are not prone... |
 |
High-quality titanium carbide powder with low oxygen content of less than 1000 ppm | Titanium carbide powder can be mixed with other carbide powders (such as tungsten carbide and vanadium carbide) to form a multi-component composite... |
 |
High cost-performance titanium carbide powder | The particle morphology of this powder is controllable and can be made into spherical, quasi-spherical or irregular shapes to meet the requirements... |
 |
Customized chromium carbide powder | 碳化铬粉末可与其他耐磨材料粉末（如碳化钨、二硫化钼等）混合，形成复合涂层，兼具高耐磨性和自润滑性，摩擦系数低至0.05，适用于无润滑或难润滑工况。在造纸机械烘缸表面，该复合涂层可减少纸张摩擦损伤，防止粘纸，提高生产效率。粉末粒径均匀，粒度分布偏差小于10%，确保涂层微观结构一致，避免性能缺... |
Same products
 |
99.5% high-purity chromium carbide powder | 卖方: 株洲华斯盛高科材料有限公司 | Chromium carbide powder has excellent wetting properties and is firmly bonded to metal substrates... |
 |
Carbonitride powder for plastic modification | 卖方: 株洲华斯盛高科材料有限公司 | The particle morphology of this powder can be controlled, and it can be made into spherical, near... |
 |
Titanium carbide hard alloy drive wheel accessory | 卖方: 株洲华斯盛高科材料有限公司 | This guide wheel is customizable with various groove geometries—including V-shaped, U-shape... |
 |
Industrial titanium carbide alloy drive wheels | 卖方: 株洲华斯盛高科材料有限公司 | This guide wheel can be customized with various slot shapes according to the specifications of wi... |
 |
Wear-resistant steel-bonded hard alloy round bar | 卖方: 株洲华斯盛高科材料有限公司 | Titanium carbide (TiC)-based cemented carbide round rods exhibit exceptional electrical conductiv... |
