Chromium carbide powder specifically for oil drilling equipment

This chromium carbide powder is black in color, with a particle size of 5-25μm, a purity of over 99%, and extremely low impurity content. The particles have good dispersibility and are easy to mix with the metal matrix. After powder metallurgy sintering, highly wear-resistant parts can be produced. It is applicable to precision bearings, micro gears and other precision instrument components, which can reduce wear and improve the operational accuracy and stability of equipment. The main methods for preparing this powder include the electric arc furnace method and the carbothermal reduction method. Among them, the powder produced by the carbothermal reduction method has a finer particle size and a lower cost, making it suitable for large-scale application. When the oxygen content of the powder is less than 0.2%, it can reduce the pores and inclusions in the coating and improve the density of the coating. After spraying chromium carbide powder on the surface of the valve tappets of a car engine, the wear of the tappets can be reduced by 80%, and the major overhaul cycle of the engine can be prolonged.

Other supplier products

	Factory direct supply high hardness steel rolling special carbide guide wheel & roller	Guide wheels, also known as guide rolls or guide wheels, are an important part of bar and wire rod rolling equipment in the iron and steel indust...
	Carbide guide wheel for wire drawing	Carbide titanium carbide guide wheel has a wide range of working temperature, -100 ℃ to 600 ℃ environment with stable performance, in the low-tem...
	Support multi-specification processing of carbide rods	Tungsten carbide titanium carbide round bar is a high-performance bar made by powder metallurgy process, with titanium carbide as the main hard p...
	Titanium carbide hard rods - available on demand	Compared with traditional high-speed steel, hard alloy titanium carbide round bars enable a 3 to 5 times increase in cutting speed, significantly r...
	Fatigue life increased by 50% Titanium carbide round rods	titanium carbide round bars can be customised with different properties by adjusting the titanium carbide content (usually 70-90%) and binder rat...

供应产品

Same products

	3D printing spherical titanium carbide powder	卖方: 株洲华斯盛高科材料有限公司	This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont...
	Titanium carbide hard alloy drive wheel - Specialized	卖方: 株洲华斯盛高科材料有限公司	The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte...
	Industrial guide wheels, titanium carbide wear-resistant alloy	卖方: 株洲华斯盛高科材料有限公司	This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ...
	Unfinished bar stock - heat treatable	卖方: 株洲华斯盛高科材料有限公司	This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter...
	Steel-based titanium carbide hard alloy round bar	卖方: 株洲华斯盛高科材料有限公司	This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo...