Titanium carbide hard alloy guide wheel - transmission
The guide wheel installation holes are manufactured with high precision, enabling the fit clearance with the shaft to be maintained within 0.005–0.01 mm. This ensures smooth rotation without oscillation and significantly enhances guiding accuracy. The guide wheel exhibits low maintenance requirements and does not necessitate frequent lubrication; periodic cleaning of surface contaminants is sufficient, making it well suited for continuous operation in automated production lines. In metal wire mesh manufacturing, guide wheels help maintain uniform mesh aperture dimensions, limiting dimensional deviations to within 5%, thereby meeting the stringent quality standards required for filter materials. These guide wheels can be customized with various groove profiles—such as V-shaped, U-shaped, or semi-circular—based on the specific diameter and type of wire or tube, allowing adaptation to diverse production specifications. Following surface polishing, the surface roughness can reach as low as Ra 0.01 μm, effectively minimizing friction-induced wire damage and increasing the breaking strength of metal wires by approximately 10%. In automotive brake cable production, the stable guidance provided by these wheels ensures consistent cable tension, reducing the risk of in-service failure. Guide wheels made from tungsten carbide-based hard alloys demonstrate excellent thermal shock resistance, remaining crack-free under rapid temperature fluctuations—from room temperature to 300 °C and back—making them ideal for intermittent operational environments. The available size range is extensive, with diameters spanning 50 mm to 500 mm and widths from 10 mm to 100 mm, enabling compatibility with a wide variety of drawing and rolling equipment. In optical fiber and cable manufacturing, these guide wheels enable precise fiber alignment, maintaining optical attenuation below 0.2 dB/km and ensuring high-quality signal transmission.
在线联系供应商
Other supplier products
 |
Titanium carbide hard rods - long-life materials | Titanium carbide round rods, fabricated from cemented carbide, exhibit excellent electrical conductivity and are widely employed as electrodes in e... |
 |
Chromium carbide powder improves impact toughness by 30% | This powder has good chemical stability. At room temperature, it does not react with water or dilute acids, but dissolves slowly in concentrated ni... |
 |
Titanium carbide powder for cemented carbide | Titanium carbide powder is a grey-black, metallic glass powder, belonging to the material of high hardness and high temperature resistance. It is... |
 |
Wide-temperature-range titanium carbide guide wheel | Hard alloy titanium carbide guide wheels exhibit excellent impact resistance. In cases where the wire is suddenly tensioned or broken, these guide ... |
 |
Industrial guide wheels - titanium carbide hard material | The titanium carbide hard alloy guide wheel exhibits outstanding thermal shock resistance, maintaining structural integrity without cracking during... |
Same products
 |
3D printing spherical titanium carbide powder | 卖方: 株洲华斯盛高科材料有限公司 | This batch of titanium carbide powder (TiC) has a purity of over 99.5%, with a particle size cont... |
 |
Titanium carbide hard alloy drive wheel - Specialized | 卖方: 株洲华斯盛高科材料有限公司 | The titanium carbide (TiC) guide wheel is fabricated via high-temperature powder metallurgy sinte... |
 |
Industrial guide wheels, titanium carbide wear-resistant alloy | 卖方: 株洲华斯盛高科材料有限公司 | This carbonized titanium (TiC) guide wheel is formed by high-temperature sintering of 99.5% pure ... |
 |
Unfinished bar stock - heat treatable | 卖方: 株洲华斯盛高科材料有限公司 | This high-purity titanium carbonitride (TiCN) round bar is fabricated via hot-pressing and sinter... |
 |
Steel-based titanium carbide hard alloy round bar | 卖方: 株洲华斯盛高科材料有限公司 | This carbonitride round bar (TiC) is formed by hot-pressing and sintering 99.5% high-purity carbo... |
