Titanium carbide rods can replace die steel
The anti-adhesion performance of titanium carbide round rods fabricated from hard alloy is highly superior. When machining adhesive materials such as aluminum and copper alloys, the likelihood of "tool build-up" is significantly reduced, thereby ensuring a smooth and high-quality machined surface. The surface properties of these rods can be further enhanced through coating treatments, such as TiAlN coating, which improve wear resistance and oxidation resistance, extending tool life by more than 50%. In the medical device industry, these rods are commonly used in the fabrication of orthopedic surgical instruments, offering both excellent sharpness and the ability to withstand high-temperature sterilization without deformation. Compared with conventional high-speed steel rods, titanium carbide round rods allow for a cutting speed that is 3 to 5 times higher, substantially reducing processing time in mass production. Their microstructure is uniform, with grain size controllable to below 1 μm, ensuring consistent mechanical properties throughout the material and preventing tool failure caused by material inhomogeneity. In the mold industry, cold stamping die inserts made from this material exhibit a service life that is 50 to 100 times longer than that of steel inserts, significantly decreasing replacement frequency and overall production costs.
在线联系供应商
Other supplier products
 |
Professional customized specification guide rollers | For the rolling mill, guide rollers (also called ring rollers, guide wheel) is an indispensable part of wires export in the wires rolling process... |
 |
Stable quality titanium carbide powder | Titanium carbide powder is a black or gray-black, high hardness and high temperature characteristics of the ultra-fine powder, often used as a hard... |
 |
Refined chromium carbide powder by gas atomization process | The powder has a high hardness, with a microhardness of up to 2200HV. The hardness of the wear-resistant coating prepared from it can reach over HR... |
 |
Titanium carbide alloy rods are suitable for metal stamping | Compared with traditional high-speed steel, hard alloy titanium carbide round bars enable a 3 to 5 times increase in cutting speed, significantly r... |
 |
Titanium carbide powder with a sintered density of 99.8% | Titanium carbide powder can be mixed with other carbide powders (such as tungsten carbide and vanadium carbide) to form multi-component composite p... |
