GD-0621 Asphalt Standard Viscometer

I. Summary
　The instrument is designed and made as per T0621 “Asphalt Standard Viscosity Test” in the Industry Standard of People’s Republic of China JTJ052-2000 Specifications and Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering. It is suitable to determine the viscosity of liquid petroleum asphalt, coal pitch and emulsified asphalt at flowing state.

II. Main technical specifications and parameters
　1. Power supply: AC 220 V±10%, 50 Hz
　2. Circular trough:
(1) Inner diameter: 160 mm
(2) Depth: 116 mm
　3. Sample tube: four pieces in a set. The diameter of effuse tube is: φ10 mm±0.025 mm, φ5 mm±0.025 mm, φ4 mm±0.025 mm and φ3 mm±0.025 mm.
　4. Ball stopper specification:
A: Diameter of ball: 12.7 mm±0.05 mm; Sign height: 92 mm±0.25 mm.
　 B: Diameter of ball: 6.35 mm±0.05 mm; Sign height: 90.3 mm±0.25 mm.
　5. Temperature controlling range: room temperature～90 ℃.
　6. Temperature controlling accuracy: ±0.1 ℃
　7. Time resolution: 0.1 s, maximum time value: 999.9 s
　8. Heating type: electric heater. Use a circulation pump circulating water bath liquid to control the temperature in the circular trough. Heating power is 600 W.
　9. Ambient temperature: -10℃～35 ℃
　10. Relative humidity: ≤ 85%
　11. Dimension: length 420 mm, width 340 mm, height 570 mm
　12. Total power consumption: not more than 700 W

Other supplier products

	GDJ-1F Brookfield Viscometer	I. Summary 　The instrument is designed and made as per T0625 “Asphalt Brookfield Rotational Viscosity Test (Brookfield Viscometer Method)&rdq...
	GD-255 Distillation Apparatus	Summary The instrument is designed and made as per the national standard of People’s Republic of ChinaGB/T255 Test Method for Distillation Ch...
	GDJ-1F Brookfield Viscometer	Summary The instrument is designed and made as per the national standard of People’s Republic of ChinaGB/T213-2008 Test Method for Calorific ...
	GDGS Insulation Material Volume Resistivity Tester	I.Application GDGS automatic tan delta tester is applied to measure the dielectric loss and capacitor value of insulation materials in high volt...
	GD-265-3 ASTM D445 AUTOMATIC VISCOSITY TUBES WASHER	Introduction: »GD-265-3 Automatic Capillary Viscometer Washeris designed and made specially for washing the capillary viscometers, which are ...

供应产品

Same products

	中国供应商 饮料厂用全自动玻璃瓶果汁液体灌装机	卖方: 河北盛辉泵业	饮料液体灌装机具有集水处理、清洗、灌装、贴标和封盖于一体的自动化机身，是精确、快速灌装稀薄至中等粘度液体的理想选择。它拥有完善的温度控制系统、自动清洗系统、精确的温度控制系统和逆流系统。
	中国供应商出厂价 500 毫升矿泉水瓶液体灌装机	卖方: 河北盛辉泵业	该机采用先进的生产工艺，结构科学合理，操作简便。广泛应用于矿泉水、茶、果汁等饮料的塑料瓶和玻璃瓶灌装。也是饮料生产厂和矿泉水生产线的理想选择。同时，它还可与旋盖机、贴标机配套组成流水线。
	受欢迎的卧式半自动高粘度液体酱料灌装机	卖方: 河北盛辉泵业	半自动膏体灌装机适用于各种粘性、非粘性、腐蚀性液体及其它小包装的定量灌装。该机由卧式半自动灌装机和小型输送带组成，有利于瓶装灌装液体的有效输送，节省人力。它具有结构合理、操作方便、智能控制等优点。
	高性能立式自动小袋棒状粉末液体包装机	卖方: 河北盛辉泵业	粉末液体灌装机装机适用于各类流动性差的酱体包装，配备三边封或四边封制袋成型及精确定位封切系统，可通过活塞行程方式调节，达到精确控制流量，自动计量和自动灌装的目的。适用于粘稠体、悬浮液和乳化油等流...
	新产品全自动无菌BIB盒中袋液体灌装包装机	卖方: 河北盛辉泵业	无菌袋灌装机是专门针对盒中袋定量灌装作业而设计的，采用流量计自动控制每次出料量，灌装精度高，灌装量设定、调节动作直观、简便。该设备设计新颖，结构合理紧凑，能自动完成开盖、定量灌装、抽真空、封盖等...