SMC Cable Braket
The SMC cablebracket is a combination consisting of a cable bracket, a post and a fixed pin. The material of the column and the pin is also made by the high temperature pultrusion of the FRP composite. The column can be arbitrarily cut length according to the needs, the height of the layer is adjusted, and the assembly is free. The cable bracket has various specifications to meet different lengths and load requirements.
Light weight, high strength, aging resistance, UV protection, more importantly, 1 mm can withstand voltages above 10,000 volts, it is a good insulation material.
Features: high insulation, chemical resistance, high fire resistance, good water resistance, accurate size, stable working performance, light weight, high strength, acid and alkali resistance, waterproof, moisture-proof.
SMC Cable Braket Specification
|
Project |
SMC Cable Braket |
Galvanized angle bracket |
|
Density (g/cm3) |
||
|
Specific strength |
167 |
90 |
|
Corrosion resistance (80°/100h) |
||
|
Insulation strength (kv/mm) |
Conductive |
|
|
Flame retardancy |
meets the FH-1 |
-- |
|
Water resistance (%) |
-- |
|
|
Corrosion resistance |
Corrosion、acid、alkali、salt resistant |
Corrosive, easy to rust |
|
insulation |
insulation |
Conduction |
|
Mechanical strength |
Top force 2.5kN deflection 1.0cm |
Top force 2.5kN deflection 1.2cm |
|
Lateral force 0.5kN |
Top horizontal offset 7cm |
Top horizontal offset 7cm |
|
Weight |
light |
weight |
|
Eddy current effect (loss) |
no |
Large loss |
|
Manufacturing process is difficult |
easy |
Many processes and long cycle |
|
Cable outer sheath scraping test |
No visible damage |
There is a little visible damage |
|
Raw material |
Cheap, resource-rich |
More expensive, partially imported |
|
Maintenance |
Free maintenance |
5-7 years need to be repaired once |
|
Installation process is difficult or easy |
Short time and easy to install |
Long time, difficult to install |
|
Use life |
30 years |
10 years |
Our bulk molding compound processand bmc compositehas a wide range of applications: differents of auto parts, different kinds of motors, Battery box and high voltage box ,building materials, electrical appliances, Energy/ power generation, etc.
在线联系供应商
Other supplier products
 |
SMC/BMC Framework | SMC/BMC FrameworkDescription Strong plasticity, precise size, high insulation and high temperature resistance. If you want to buy bmc moldingand ... |
 |
SMC/BMC Antenna Reflector | (1) High precision, high efficiency, and high gain. The most important job of using SMC for the manufacture of antennas is to fully exploit its fe... |
 |
BMC/SMC Motor | BMC/SMC Motor Description BMC plastic edging motor replaces traditional iron and aluminum, reduces the process, seals more, and has higher safet... |
 |
Auto Parts And Accessories | Auto Parts Description Parts made from sheet molding compound (SMC) are typically 25-35% lighter than steel parts and aluminum products of the same... |
 |
SMC Cable Braket | The SMC cablebracket is a combination consisting of a cable bracket, a post and a fixed pin. The material of the column and the pin is also made by... |
Same products
|
|
SMC Cable Braket | 卖方: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | The SMC cablebracket is a combination consisting of a cable bracket, a post and a fixed pin. The ... |
 |
SMC/BMC Antenna Reflector | 卖方: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | High precision, high efficiency, and high gain The most important job of using bmc reflectorfor ... |
 |
BMC, SMC, GRP, GFK Roof Tiles | 卖方: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | BMC, SMC, GFK, GRP roofing materials are glassfiber reinforced plastic, also known as glassfiber ... |
