Fully Automatic Stripping Machine for Automotive Wires
Standards：
GB/T2951 - 2008
IEC60811
Technical Features:
1. Adopting digital technology to achieve one - click digital setting of stripping thickness.
2. Calibrating the origin before slicing and automatically returning to the origin after slicing.
Main Parameters:
1. Maximum working surface width: 190mm
2. Stripping speed: 16.7m/min (adjustable) (Upper and lower press rollers: rotation speed 110 revolutions per minute)
3. Adjustment range of the upper press roller (maximum feeding thickness): 0 - 10mm
4. Slicing thickness: 0.6 - 1.5mm
5. Blade material: Imported high - speed steel, surgical - knife grade
6. Power supply: AC 220V 50HZ
7. Slicing thickness: Set via touch screen, with a setting range of 0.5 - 1.5mm
8. Safety baffle to prevent accidental injury to hands
9. Dimensions: 600X450X1350mm
在线联系供应商
Other supplier products
 |
45 Degree Flammability Tester | Standard ASTM D1230: Flammability of Apparel Textiles (45° Inclined Method) CFR 16 Part 1610: Flammability of Clothing Textiles (Federal St... |
 |
Fogging Tester | Standards DIN 75201: Automotive trim material fogging resistance. ISO 6452: Coated fabrics fogging behavior in vehicle interiors. SAE J1756: A... |
 |
Voltage Drop Tester for Automotive Wire Connectors-QINSUN | The voltage drop tester for automotive wire connectors is suitable for measuring the voltage drop at similar connection interfaces such as the pi... |
 |
Fabric Down-Proof Impact Tester (Impact Method) | Introduction The first sample is made of bags which built a certain quality of the down. The sample bag is placed on the slope, and the impact nee... |
 |
Fabric Negative-ion Concentration Tester | Standard GB/T 30128-2013: Textiles – Test and Evaluation of Negative Ion Generation Application Functional Textile R&D: Assesses air-p... |
Same products
 |
Seat Bumping and Creep Test Bench | 卖方: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | 卖方: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | 卖方: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | 卖方: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
