Fully Automatic Stripping Machine for Automotive Wires
Standards：
GB/T2951 - 2008
IEC60811
Technical Features:
1. Adopting digital technology to achieve one - click digital setting of stripping thickness.
2. Calibrating the origin before slicing and automatically returning to the origin after slicing.
Main Parameters:
1. Maximum working surface width: 190mm
2. Stripping speed: 16.7m/min (adjustable) (Upper and lower press rollers: rotation speed 110 revolutions per minute)
3. Adjustment range of the upper press roller (maximum feeding thickness): 0 - 10mm
4. Slicing thickness: 0.6 - 1.5mm
5. Blade material: Imported high - speed steel, surgical - knife grade
6. Power supply: AC 220V 50HZ
7. Slicing thickness: Set via touch screen, with a setting range of 0.5 - 1.5mm
8. Safety baffle to prevent accidental injury to hands
9. Dimensions: 600X450X1350mm
Send product request
Other supplier products
 |
Automotive Wires Ozone Aging Chamber | Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive... |
 |
Conical twin screw extrusion platform | Product Introduction: The conical twin-screw torque rheometer is composed of main control unit and conical twin-screw unit, which can simulate the... |
 |
Low-Temperature Bending Resistance Tester | Applicable Standards The tester adheres to international standards for material testing at low temperatures, including: ISO 4674-2(Rubber- or p... |
 |
Sweat Color Fastness Tester-QINSUN | I. Product Overview TheSweat Color Fastness Testeris a specialized instrument designed to evaluate the colorfastness of textiles against perspirat... |
 |
Thermal Protective Performance Tester (TPP) | The Thermal Protective Performance (TPP) Test Device was developed to measure the time elapsed for convective and radiant heat to penetrate through... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
